Filter By

Categories

Categories

Best Products
Our Blog
Valveseal

There are 74 products.

Showing 1-54 of 74 item(s)

Active filters

PN10 Wafer Rising Stem Knife Gate Valve
      Knife Gate Valves

      GENERAL CHARACTERISTICS:

      • Range from DN50 to DN600.
      • All/Nothing function or control
      • One-way closing
      • Low pressure drop
      • Stuffing box assembly: gasket and O-ring (same materials as seat gasket) to ensure elasticity and reduce operating torque
      • Possibility of regulating thick fluids with the adaptation of a diaphragm

      NORMATIVES :

      • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H
      • On request: Product according to EU directive "Potentially explosive atmospheres" No 94/9/EC ATEX II 2 GD c and ATEX II 3 GD c.
      • Wafer threaded mounting between flanges: EN 1092-2, DIN 2501 ISO PN10 Pressure test: EN 12266-1, DIN 3230, BS5154, ISO 5208.

      CONDITIONS OF SERVICE (EPDM):

      • Maximum working pressure: DN50-250: 10 bar / DN300-450: 7 bar / DN500-600: 4 bar.
      • Maximum working temperature : - 10 °C / + 80 °C.

      £0.00Price
      Resilient Seat Gate Valve PN16 Flanges Din PN-10/16
          Gate Valves

          GENERAL CHARACTERISTICS:

          • Range from DN40 to DN600.
          • Full step.
          • 100% waterproof bi-directional closure.
          • Minimal pressure drop.
          • Removable in load.
          • Under torque.
          • Flanges with RF protrusion.
          • Epoxy paint 250 microns. RAL 5017

          NORMATIVES :

          • Design : DIN 3352.
          • Manufactured according to: EN 1074-2.
          • Mounting between flanges: PN10/16 EN 1092-2, ISO 7005-2
          • Pressure tests:: EN 12266-1 Class A.
          • Body: 24 bar. Seat: 17,6 bar.
          • European Directive 2014/68/EU: Excluding section 2b up to DN300. Category I Module A from DN350 to DN600.

          CONDITIONS OF SERVICE (EPDM):

          • Maximum working pressure: 16 bar.
          • Maximum working temperature : -10°C / +90°C.

          £0.00Price
          Butterfly Valve PN16 Wafer PN-10/16/150 Lbs
              Butterfly Valves - Techflow

              GENERAL CHARACTERISTICS:

              • Concentric disc valves.
              • Range from DN40 to DN600.
              • Two-way closing.
              • Long neck for heat insulation installations.
              • One-piece shaft. Prevents water hammer breakage.
              • Cartridge ring for easy replacement
              • Reduced dimensions and weights
              • No gaskets are required for installation.
              • Low pressure drop.
              • Upper flange ISO 5211.
              • 10-position lever.

              NORMATIVES :

              • Design: BS EN 593.
              • Distance between faces: EN 558-1 Series 20, ISO 5272 Series 20, DIN 3202.
              • Mounting between flanges: PN10 / PN16 EN 1092-2, BS450, ANSI B16.1-5
              • Pressure tests: EN 12266-1, DIN 3230, BS6755 and ISO 5208:
              • Body: 24 bar.
              • Seat: 17.6 bar.
              • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

              CONDITIONS OF SERVICE (EPDM):

              • Maximum working pressure: 16 bar.
              • Maximum working temperature: -10 °C / +120 °C.
              • Peak temperature : -15 °C / 130 °C.

              £0.00Price
              Wafer Knife Valve PN10 With Double Acting Pneumatic Cylinder
                  Knife Gate Valves

                  GENERAL CHARACTERISTICS:

                  • Range from DN50 to DN1200.
                  • All/Nothing function or control
                  • One-way closing
                  • Low pressure drop
                  • Stuffing box assembly: gasket and O-ring (same materials as seat gasket) to ensure elasticity and reduce operating torque
                  • Possibility of regulating thick fluids with the adaptation of a diaphragm

                  NORMATIVES :

                  • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H
                  • On request: Product according to EU directive "Potentially explosive atmospheres" No 94/9/EC ATEX II 2 GD c and ATEX II 3 GD c.
                  • Wafer threaded mounting between flanges: EN 1092-2, DIN 2501 ISO PN10 Pressure test: EN 12266-1, DIN 3230, BS5154, ISO 5208.

                  CONDITIONS OF SERVICE (EPDM):

                  • Maximum working pressure: DN50-250: 10 bar / DN300-450: 7 bar / DN500-600: 4 bar.
                  • Maximum working temperature : - 10 °C / + 80 °C.

                  £0.00Price
                  Resilent Seat Gate Valve Rising Stem PN16 Flanges Din PN10/16
                      Gate Valves

                      GENERAL CHARACTERISTICS:

                      • Range from DN50 to DN600.
                      • Full step.
                      • 100% waterproof bi-directional closure.
                      • Minimal pressure drop.
                      • Under torque.
                      • Epoxy paint 250 microns. RAL 5017

                      NORMATIVES :

                      • Design : DIN 3352.
                      • Manufactured according to: EN 1074-2.
                      • Assembly with PVC connections.
                      • Distance between faces: EN 558-1 Series 14.
                      • Mounting between flanges: PN10/16 EN 1092-2, ISO 7005-2
                      • Pressure tests:: EN 12266-1 Class A.
                      • Body: 24 bar. Seat: 17,6 bar.
                      • European Directive 2014/68/EU: Category I Module A.

                      CONDITIONS OF SERVICE (EPDM):

                      • Maximum working pressure: 16 bar.
                      • Maximum working temperature : -10°C / +90°C.

                      £0.00Price
                      Butterfly Valve PN16 LUG PN-16
                          Butterfly Valves - Techflow

                          GENERAL CHARACTERISTICS:

                          • Concentric disc valves
                          • Range from DN40 to DN300
                          • Two-way closing
                          • One-piece shaft. Prevents water hammer breakage
                          • Cartridge ring for easy replacement
                          • Reduced dimensions and weights
                          • No gaskets needed for installation
                          • Upper flange ISO 5211
                          • 10-position lever

                          NORMATIVES :

                          • Design: BS EN 593.
                          • Distance between faces: EN 558-1 Series 20, ISO 5272 Series 20, DIN 3202.
                          • Mounting between flanges: PN10 / PN16 EN 1092-2.
                          • Pressure tests: EN 12266-1, DIN 3230, BS6755 and ISO 5208
                          • Body: 24 bar.
                          • Seat: 17.6 bar.
                          • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                          CONDITIONS OF SERVICE (EPDM):

                          • Maximum working pressure: 16 bar.
                          • Maximum working temperature: -10 °C / +120 °C.
                          • Peak temperature : -15 °C / 130 °C
                          £0.00Price
                          Knife Valve PN10 Wafer With Lever
                              Knife Gate Valves

                              GENERAL CHARACTERISTICS:

                              • Range from DN50 to DN300.
                              • All/Nothing function or control
                              • One-way closing
                              • Low pressure drop
                              • Stuffing box assembly: gasket and O-ring (same materials as seat gasket) to ensure elasticity and reduce operating torque
                              • Possibility of regulating thick fluids with the adaptation of a diaphragm

                              NORMATIVES :

                              • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H
                              • On request: Product according to EU directive "Potentially explosive atmospheres" No 94/9/EC ATEX II 2 GD c and ATEX II 3 GD c.
                              • Wafer threaded mounting between flanges: EN 1092-2, DIN 2501 ISO PN10 Pressure test: EN 12266-1, DIN 3230, BS5154, ISO 5208.

                              CONDITIONS OF SERVICE (EPDM):

                              • Maximum working pressure: DN50-250: 10 bar / DN300-450: 7 bar / DN500-600: 4 bar.
                              • Maximum working temperature : - 10 °C / + 80 °C.

                              £0.00Price
                              Resilient Seat Gate Valve With Limit Switches PN16
                                  Gate Valves

                                  GENERAL CHARACTERISTICS:

                                  • Range from DN40 to DN400.
                                  • Full step.
                                  • 100% waterproof bi-directional closure.
                                  • Minimal pressure drop.
                                  • Two mechanical limit switches.
                                  • A position indicator.
                                  • Under torque.
                                  • Flanges with RF protrusion.
                                  • Epoxy paint 250 microns. RAL 5017.

                                  NORMATIVES :

                                  • Design : DIN 3352.
                                  • Mounting between flanges: PN25 AT 1092-2.
                                  • Distance between faces: EN 558-1 Series 14.
                                  • Pressure tests:: EN 12266-1 Class A.
                                  • Body: 24 bar. Seat: 17,6 bar.
                                  • European Directive 2014/68/EU: exc. s/art.1 section 2b up to DN300. Category I Module A from DN350 to DN400.

                                  CONDITIONS OF SERVICE (EPDM):

                                  • Maximum working pressure: 16 bar.
                                  • Maximum working temperature : -10°C / +90°C.
                                  £0.00Price
                                  Butterfly Valve TF-BFV-FS13 PN16 DIN Flanges PN-10/16
                                      Butterfly Valves - Techflow

                                      GENERAL CHARACTERISTICS:

                                      • Concentric disc valves.
                                      • Range from DN50 to DN1200
                                      • Two-way closing.
                                      • One-piece shaft. Prevents water hammer breakage.
                                      • No gaskets are required for installation.
                                      • Low pressure drop.
                                      • Upper flange ISO 5211.
                                      • Epoxy paint 250 microns.RAL5017.

                                      NORMATIVES :

                                      • Design : EN 1074-2
                                      • Distance between faces: EN 558-1 Series 20.
                                      • Mounting between flanges: PN10 / PN16 EN 1092-2.
                                      • Pressure tests:: EN 12266-1, DIN 3230, BS6755 and ISO 5208
                                      • Body: 24 bar. Seat: 17,6 bar.
                                      • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                      CONDITIONS OF SERVICE (EPDM):

                                      • Maximum working pressure: 16 bar.
                                      • Maximum working temperature : -10 °C / +100 °C
                                      • Peak temperature: -15 °C / 120 °C.
                                      £0.00Price
                                      Resilient Seat Gate Valve PN16 Pvc Ends
                                          Gate Valves

                                          GENERAL CHARACTERISTICS:

                                          • Range from DN50 (63) to DN300 (315).
                                          • Full step.
                                          • 100% waterproof bi-directional closure.
                                          • Minimal pressure drop.
                                          • Under torque.
                                          • Epoxy paint 250 microns. RAL 5017

                                          NORMATIVES :

                                          • Design : DIN 3352.
                                          • Manufactured according to: EN 1074-2.
                                          • Installation with PVC connections
                                          • Pressure tests:: EN 12266-1 Class A.
                                          • Body: 24 bar. Seat: 17,6 bar.
                                          • European Directive 2014/68/EU: Excluding section 2b.

                                          CONDITIONS OF SERVICE (EPDM):

                                          • Maximum working pressure: 16 bar.
                                          • Maximum working temperature : -10°C / +90°C.

                                          £0.00Price
                                          Butterfly Valve TF-BFV-FS20 PN16 DIN Flanges PN-10/16
                                              Butterfly Valves - Techflow

                                              GENERAL CHARACTERISTICS:

                                              • Concentric disc valves.
                                              • Range from DN50 to DN1200
                                              • Two-way closing.
                                              • One-piece shaft. Prevents water hammer breakage.
                                              • No gaskets are required for installation.
                                              • Low pressure drop.
                                              • Upper flange ISO 5211.
                                              • Epoxy paint 250 microns.RAL5017.

                                              NORMATIVES :

                                              • Design : EN 1074-2
                                              • Distance between faces: EN 558-1 Series 20.
                                              • Mounting between flanges: PN10 / PN16 EN 1092-2.
                                              • Pressure tests:: EN 12266-1, DIN 3230, BS6755 and ISO 5208
                                              • Body: 24 bar. Seat: 17,6 bar.
                                              • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                              CONDITIONS OF SERVICE (EPDM):

                                              • Maximum working pressure: 16 bar.
                                              • Maximum working temperature : -10 °C / +100 °C
                                              • Peak temperature: -15 °C / 120 °C.

                                              £0.00Price
                                              Threaded Resilient Seat Gate Valve PN16
                                                  Gate Valves

                                                  GENERAL CHARACTERISTICS:

                                                  • Range from DN3/4″ to DN2″
                                                  • Full step.
                                                  • 100% waterproof bi-directional closure.
                                                  • Minimal pressure drop.
                                                  • Guided gate.
                                                  • Removable in load.
                                                  • Under torque.
                                                  • Epoxy paint 250 microns. RAL 5017.

                                                  NORMATIVES :

                                                  • Design : DIN 3352.
                                                  • Mounting between flanges: PN25 AT 1092-2.
                                                  • Pressure tests:: EN 12266-1 Class A.
                                                  • Body: 24 bar. Seat: 17,6 bar.

                                                  CONDITIONS OF SERVICE (EPDM):

                                                  • Maximum working pressure: 16 bar.
                                                  • Maximum working temperature : -10°C / +90°C.
                                                  £0.00Price
                                                  BI-Eccentric Butterfly Valve TF-DE-BFV-F PN10 DIN Flanges PN-10
                                                      Butterfly Valves - Techflow

                                                      GENERAL CHARACTERISTICS:

                                                      • Double eccentric valves.
                                                      • Range from DN100 to DN2000.
                                                      • One-way closing.
                                                      • Replaceable disc seat.
                                                      • Low pressure drop.
                                                      • Upper flange ISO 5211.
                                                      • Epoxy paint 250 microns.RAL5017.

                                                      NORMATIVES :

                                                      • Design : BS EN 593.
                                                      • Distance between faces: EN 558-1 Series 14.
                                                      • Mounting between flanges: PN40 EN 1092-2.
                                                      • Pressure tests:: EEN 12266-1.
                                                      • Body: 15 bar. Seat: 11 bar.
                                                      • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                                      CONDITIONS OF SERVICE (EPDM):

                                                      • Maximum working pressure: 10 bar.
                                                      • Peak temperature: -5 °C / + 80 °C.
                                                      £0.00Price
                                                      PN10 Wafer Through Knife Gate Valve
                                                          Knife Gate Valves

                                                          USE:
                                                          Production of pulp, water, water treatment, waste water, chemical industry (powdery or crystallizing products), wine products, pulverized (cement works, pneumatic transport, storage).

                                                          £0.00Price
                                                          Gate Valve Metal/Metal PN10. Fixed Spindle With Flanges PN-10
                                                              Gate Valves

                                                              GENERAL CHARACTERISTICS:

                                                              • Measures / Size DN-40 to DN-300.
                                                              • Non-ascent rotating spindle.
                                                              • Internal threaded spindle.
                                                              • Bolted bonnet.
                                                              • Metal to brass clasp.
                                                              • Solid wedge.
                                                              • Grey paint RAL 7011 90µm

                                                              NORMATIVES :

                                                              • Manufacturing: ISO 9001 : 2015.
                                                              • Directive EC 2014/68/EU: EC No. 0036 Risk Category I Module A2
                                                              • Pressure tests:: EN 12266-1 Class A.
                                                              • Body : 15 bar. Seat : 11 bar.
                                                              • Distance between faces: EN 558-1 Series 14 (DIN 3202 F4).
                                                              • R.F. Flanges EN 1092-2 PN-10.
                                                              • DIN 3352 design

                                                              CONDITIONS OF SERVICE (EPDM):

                                                              • Maximum working pressure: 10 bar.
                                                              • Maximum working temperature : -10°C / +90°C.
                                                              £0.00Price
                                                              BI-Eccentric Butterfly Valve TF-DE-BFV-F PN16 DIN Flanges PN-16
                                                                  Butterfly Valves - Techflow

                                                                  GENERAL CHARACTERISTICS:

                                                                  • Double eccentric valves.
                                                                  • Range from DN100 to DN2000.
                                                                  • One-way closing.
                                                                  • Replaceable disc seat.
                                                                  • Low pressure drop.
                                                                  • Upper flange ISO 5211.
                                                                  • Epoxy paint 250 microns.RAL5017.

                                                                  NORMATIVES :

                                                                  • Design : BS EN 593.
                                                                  • Distance between faces: EN 558-1 Series 14.
                                                                  • Mounting between flanges: PN40 EN 1092-2.
                                                                  • Pressure tests:: EEN 12266-1.
                                                                  • Body: 24 bar. Seat: 17,5 bar.
                                                                  • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                                                  CONDITIONS OF SERVICE (EPDM):

                                                                  • Maximum working pressure: 16 bar.
                                                                  • Peak temperature: -5 °C / + 80 °C.
                                                                  £0.00Price
                                                                  BI-Eccentric Butterfly Valve TF-DE-BFV-F PN25 DIN Flanges PN-25
                                                                      Butterfly Valves - Techflow

                                                                      GENERAL CHARACTERISTICS:

                                                                      • Double eccentric valves.
                                                                      • Range from DN100 to DN1600.
                                                                      • One-way closing.
                                                                      • Replaceable disc seat.
                                                                      • Low pressure drop.
                                                                      • Upper flange ISO 5211.
                                                                      • Epoxy paint 250 microns.RAL5017.

                                                                      NORMATIVES :

                                                                      • Design : BS EN 593.
                                                                      • Distance between faces: EN 558-1 Series 14.
                                                                      • Mounting between flanges: PN40 EN 1092-2.
                                                                      • Pressure tests:: EEN 12266-1.
                                                                      • Body: 37.5 bar. Seat: 27,5 bar.
                                                                      • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                                                      CONDITIONS OF SERVICE (EPDM):

                                                                      • Maximum working pressure: 25 bar.
                                                                      • Peak temperature: -5 °C / + 80 °C.
                                                                      £0.00Price
                                                                      Gate Valve Metal/Metal PN16.Rising Stem.Flanges PN16
                                                                          Gate Valves

                                                                          GENERAL CHARACTERISTICS:

                                                                          • Measures: DN-50 to DN-300.
                                                                          • Rising stem.
                                                                          • A.Inox Spindle
                                                                          • Bolted bonnet.
                                                                          • Fixed non-upward steering wheel
                                                                          • Metal to brass clasp.
                                                                          • Solid wedge.
                                                                          • Paint Grey.RAL 7011µm

                                                                          NORMATIVES :

                                                                          • Manufacturing: ISO 9001 : 2015.
                                                                          • EC Directive / Directive 2014/68/EU: EC No. 0036 Risk Category III module H.
                                                                          • Pressure tests: EN 12266-1 rate B.
                                                                          • Body : 24 bar. Seat : 17,5 bar.
                                                                          • Length EN 558 series 14 (DIN 3202 F4).
                                                                          • R.F. Flanges EN 1092-2 PN-16
                                                                          • DIN 3352 design

                                                                          CONDITIONS OF SERVICE (EPDM):

                                                                          • Maximum working pressure: 16 bar.
                                                                          • Maximum working temperature : -10°C / +120°C
                                                                          £0.00Price
                                                                          BI-Eccentric Butterfly Valve TF-DE-BFV-F PN40 DIN Flanges PN-40
                                                                              Butterfly Valves - Techflow

                                                                              GENERAL CHARACTERISTICS:

                                                                              • Double eccentric valves.
                                                                              • Range from DN200 to DN1200
                                                                              • One-way closing.
                                                                              • Replaceable disc seat.
                                                                              • Low pressure drop.
                                                                              • Upper flange ISO 5211.
                                                                              • Epoxy paint 250 microns.RAL5017.

                                                                              NORMATIVES :

                                                                              • Design : BS EN 593.
                                                                              • Distance between faces: EN 558-1 Series 14.
                                                                              • Mounting between flanges: PN40 EN 1092-2.
                                                                              • Pressure tests:: EEN 12266-1.
                                                                              • Body: 60bar. Seat: 44 bar.
                                                                              • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                                                              CONDITIONS OF SERVICE (EPDM):

                                                                              • Maximum working pressure: 40 bar.
                                                                              • Peak temperature: -5 °C / + 80 °C.
                                                                              £0.00Price
                                                                              Gate Valve Metal/Metal PN16.Rising Stem.Flanges PN16
                                                                                  Gate Valves

                                                                                  GENERAL CHARACTERISTICS:

                                                                                  • Measures: DN-40 to DN-300.
                                                                                  • Rising stem.
                                                                                  • A.Inox Spindle
                                                                                  • Bolted bonnet.
                                                                                  • Fixed non-upward steering wheel
                                                                                  • Stainless steel metal to metal clasp.
                                                                                  • Solid wedge.
                                                                                  • Paint Grey.RAL 7011µm

                                                                                  NORMATIVES :

                                                                                  • Manufacturing: ISO 9001 : 2015.
                                                                                  • EC Directive / Directive 2014/68/EU: EC No. 0036 Risk Category III module H.
                                                                                  • Pressure tests: EN 12266-1 rate B.
                                                                                  • Body : 24 bar. Seat : 17,5 bar.
                                                                                  • Length EN 558 series 14 (DIN 3202 F4).
                                                                                  • R.F. Flanges EN 1092-2 PN-16
                                                                                  • DIN 3352 design

                                                                                  CONDITIONS OF SERVICE (EPDM):

                                                                                  • Maximum working pressure: 16 bar.
                                                                                  • Maximum working temperature : -10°C / +120°C.

                                                                                  £0.00Price
                                                                                  Wafer Butterfly Valve Mono-Flange PN10 DIN Flanges PN-10
                                                                                      Butterfly Valves - Techflow

                                                                                      GENERAL CHARACTERISTICS:

                                                                                      • Concentric disc valves.
                                                                                      • Range from DN700 to DN1200
                                                                                      • Two-way closing.
                                                                                      • Double axis that improves the flow coefficient.
                                                                                      • Soft seal adapted for low torque.
                                                                                      • No gaskets are required for installation.
                                                                                      • Low pressure drop.
                                                                                      • Upper flange ISO 5211.
                                                                                      • Epoxy paint 150 microns.

                                                                                      NORMATIVES :

                                                                                      • Design : BS EN 593.
                                                                                      • Distance between faces: EN 558-1 Series 20.
                                                                                      • Mounting between flanges: PN16 EN 1092-2.
                                                                                      • Pressure tests:: EN 12266-1, DIN 3230, BS6755 and ISO 5208
                                                                                      • Body: 15 bar. Seat: 11 bar.
                                                                                      • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                                                                      CONDITIONS OF SERVICE (EPDM):

                                                                                      • Maximum working pressure: 10 bar.
                                                                                      • Peak temperature: -10 °C / + 130 °C.
                                                                                      • Maximum working temperature: -30 °C / 150 °C.
                                                                                      £0.00Price
                                                                                      Stainless Steel Total Knife Valve PN10 Wafer With Lever
                                                                                          Knife Gate Valves

                                                                                          GENERAL CHARACTERISTICS:

                                                                                          • Range from DN50 to DN300.
                                                                                          • All/Nothing function or control
                                                                                          • One-way closing
                                                                                          • Low pressure drop
                                                                                          • Stuffing box assembly: gasket and O-ring (same materials as seat gasket) to ensure elasticity and reduce operating torque
                                                                                          • Possibility of regulating thick fluids with the adaptation of a diaphragm

                                                                                          NORMATIVES :

                                                                                          • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H
                                                                                          • On request: Product according to EU directive "Potentially explosive atmospheres" No 94/9/EC ATEX II 2 GD c and ATEX II 3 GD c.
                                                                                          • Wafer threaded mounting between flanges: EN 1092-2, DIN 2501 ISO PN10 Pressure test: EN 12266-1, DIN 3230, BS5154, ISO 5208.

                                                                                          CONDITIONS OF SERVICE (EPDM):

                                                                                          • Maximum working pressure: DN50-250: 10 bar / DN300-450: 7 bar / DN500-600: 4 bar.
                                                                                          • Maximum working temperature : - 10 °C / + 80 °C.

                                                                                          £0.00Price
                                                                                          Wafer Butterfly Valve Moni-Flange PN16 DIN Flanges PN-16
                                                                                              Butterfly Valves - Techflow

                                                                                              GENERAL CHARACTERISTICS:

                                                                                              • Concentric disc valves.
                                                                                              • Range from DN600 to DN1200.
                                                                                              • Two-way closing.
                                                                                              • Double axis that improves the flow coefficient.
                                                                                              • Soft seal adapted for low torque.
                                                                                              • No gaskets are required for installation.
                                                                                              • Low pressure drop.
                                                                                              • Upper flange ISO 5211.
                                                                                              • Epoxy paint 150 microns.

                                                                                              NORMATIVES :

                                                                                              • Design : BS EN 593.
                                                                                              • Distance between faces: EN 558-1 Series 20.
                                                                                              • Mounting between flanges: PN16 EN 1092-2.
                                                                                              • Pressure tests:: EN 12266-1, DIN 3230, BS6755 and ISO 5208
                                                                                              • Body: 24 bar. Seat: 17,6 bar.
                                                                                              • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                                                                              CONDITIONS OF SERVICE (EPDM):

                                                                                              • Maximum working pressure: 16 bar.
                                                                                              • Peak temperature: -10 °C / + 130 °C.
                                                                                              • Maximum working temperature: -30 °C / 150 °C.

                                                                                              £0.00Price
                                                                                              Gate Valve Carbon Steel. PN16. Rising Spindle. Flanges PN16
                                                                                                  Gate Valves

                                                                                                  GENERAL CHARACTERISTICS:

                                                                                                  • Measures: DN-50 to DN-300.
                                                                                                  • Rising stem.
                                                                                                  • Bolted bonnet.
                                                                                                  • Fixed non-upward steering wheel
                                                                                                  • Metal-to-metal clasp with stellited seat.
                                                                                                  • One-piece flexible wedge .
                                                                                                  • Paint Grey.RAL 7001 60µm

                                                                                                  NORMATIVES :

                                                                                                  • Manufacturing: ISO 9001 : 2008 and ISO 14001: 2004
                                                                                                  • EC Directive / Directive 2014/68/EU: EC No. 0036 Risk Category III module H.
                                                                                                  • Pressure tests: EN 12266-1 rate B.
                                                                                                  • Body : 24 bar. Seat : 17,6 bar
                                                                                                  • Distance between faces: EN 558-1 Series 15.
                                                                                                  • R.F. Flanges / Flanged R.F. according to EN 1092-2 PN-16
                                                                                                  • Design / Desing according to EN 1984
                                                                                                  • ATEX / ATEX Group II Category 2G/2D zone 1&21 zone 2&22 according to directive 2014/34/EU. Optional ATEX marking.

                                                                                                  CONDITIONS OF SERVICE (EPDM):

                                                                                                  • Maximum working pressure: 132 bar.
                                                                                                  • Maximum working temperature : -29°C / +425°C.

                                                                                                  £0.00Price
                                                                                                  Wafer Butterfly Valve PN25 Ductile Iron Disc Aand EPDM Seat
                                                                                                      Butterfly Valves - Techflow

                                                                                                      GENERAL CHARACTERISTICS:

                                                                                                      • Concentric disc valves.
                                                                                                      • Range from DN40 to DN300.
                                                                                                      • Two-way closing.
                                                                                                      • No gaskets are required for installation.
                                                                                                      • Low pressure drop.
                                                                                                      • Upper flange ISO 5211.
                                                                                                      • Epoxy paint 150 microns.

                                                                                                      NORMATIVES :

                                                                                                      • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H
                                                                                                      • Design : BS EN 593.
                                                                                                      • Distance between faces: EN 558-1 Series 20.
                                                                                                      • Mounting between flanges: PN25 EN 1092-2. .
                                                                                                      • Pressure tests:: EN 12266-1, DIN 3230, BS6755 and ISO 5208
                                                                                                      • Body: 37.5 bar. Seat : 27,5 bar

                                                                                                      CONDITIONS OF SERVICE (EPDM):

                                                                                                      • Maximum working pressure: 25 bar.
                                                                                                      • Peak temperature: -30 °C / + 150 °C.
                                                                                                      • Maximum working temperature: -15 °C / + 130 °C.

                                                                                                      £0.00Price
                                                                                                      Stainless Steel Gate Valve. Ascending Spindle. PN16
                                                                                                          Gate Valves

                                                                                                          GENERAL CHARACTERISTICS:

                                                                                                          • Sizes: 14″ flywheel Ø 16″-24″ Gearbox
                                                                                                          • Rising stem.
                                                                                                          • Bolted bonnet.
                                                                                                          • Fixed non-upward steering wheel
                                                                                                          • TRIM 8 stellited seat lock
                                                                                                          • One-piece flexible wedge.
                                                                                                          • Grey paint. RAL 7001 60µm.

                                                                                                          NORMATIVES :

                                                                                                          • Manufacturing: ISO 9001 : 2015.
                                                                                                          • EC Directive / Directive 2014/68/EU: EC No. 0036 Risk Category III module H.
                                                                                                          • Pressure tests: EN 12266-1 rate B.
                                                                                                          • Length EN 558 series 14
                                                                                                          • R.F. Flanges EN 1092-2 PN-16
                                                                                                          • Design EN 1984 & EN 12516-1.

                                                                                                          CONDITIONS OF SERVICE (EPDM):

                                                                                                          • Maximum working pressure: 16 bar.
                                                                                                          • Maximum working temperature : -29°C / +538°C.

                                                                                                          £0.00Price
                                                                                                          Wafer Butterfly Valve PN16 Bronze-Aluminium Disc And Seat Nbr
                                                                                                              Butterfly Valves - Techflow

                                                                                                              GENERAL CHARACTERISTICS:

                                                                                                              • Concentric disc valves.
                                                                                                              • Range from DN40 to DN300.
                                                                                                              • Two-way closing.
                                                                                                              • No gaskets are required for installation.
                                                                                                              • Low pressure drop.
                                                                                                              • Upper flange ISO 5211.
                                                                                                              • Epoxy paint 150 microns.

                                                                                                              NORMATIVES :

                                                                                                              • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H
                                                                                                              • Design : BS EN 593.
                                                                                                              • Distance between faces: EN 558-1 Series 20.
                                                                                                              • Mounting between flanges: PN10 / PN16 EN 1092-2. - ANSI B16.1-5.
                                                                                                              • Pressure tests:: EN 12266-1, DIN 3230, BS6755 and ISO 5208
                                                                                                              • Body: 24 bar. Seat: 17,6 bar.
                                                                                                              • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                                                                                              CONDITIONS OF SERVICE (EPDM):

                                                                                                              • Maximum working pressure: 25 bar.
                                                                                                              • Peak temperature: -10 °C / + 80 °C.
                                                                                                              • Maximum working temperature: -20 °C / +90 °C.

                                                                                                              £0.00Price
                                                                                                              Carbon Steel Gate Valve. Rising Stem. ANSI 150Lbs RF.
                                                                                                                  Gate Valves

                                                                                                                  GENERAL CHARACTERISTICS:

                                                                                                                  • Sizes: 14″ flywheel Ø 16″-24″ Gearbox
                                                                                                                  • Rising stem.
                                                                                                                  • Bolted bonnet.
                                                                                                                  • Fixed non-upward steering wheel
                                                                                                                  • TRIM 8 stellited seat lock
                                                                                                                  • One-piece flexible wedge.
                                                                                                                  • Grey paint. RAL 7001 60µm.

                                                                                                                  NORMATIVES :

                                                                                                                  • Manufacturing: ISO 9001 : 2015.
                                                                                                                  • EC Directive / Directive 2014/68/EU: EC No. 0036 Risk Category III module H.
                                                                                                                  • Pressure tests: EN 12266-1 rate B.
                                                                                                                  • Body : 24 bar. Seat : 17,5 bar.
                                                                                                                  • Length EN 558 series 14 (DIN 3202 F4).
                                                                                                                  • R.F. Flanges EN 1092-2 PN-16
                                                                                                                  • DIN 3352 design

                                                                                                                  CONDITIONS OF SERVICE (EPDM):

                                                                                                                  • Maximum working pressure: 20 bar.
                                                                                                                  • Maximum working temperature : -29°C / +425°C.

                                                                                                                  £0.00Price
                                                                                                                  Wafer Butterfly Valve TF-BFV-W Seat In FPM PN16 Flanges PN10/16/ANSI150
                                                                                                                      Butterfly Valves - Techflow

                                                                                                                      GENERAL CHARACTERISTICS:

                                                                                                                      • Concentric disc valves.
                                                                                                                      • Range from DN40 to DN300.
                                                                                                                      • Two-way closing.
                                                                                                                      • No gaskets are required for installation.
                                                                                                                      • Low pressure drop.
                                                                                                                      • Upper flange ISO 5211.
                                                                                                                      • Epoxy paint 250 microns.

                                                                                                                      NORMATIVES :

                                                                                                                      • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H
                                                                                                                      • Design : BS EN 593.
                                                                                                                      • Distance between faces: EN 558-1 Series 20.
                                                                                                                      • Mounting between flanges: PN10 / PN16 EN 1092-2. - ANSI B16.1-5.
                                                                                                                      • Pressure tests:: EN 12266-1, DIN 3230, BS6755 and ISO 5208
                                                                                                                      • Body: 24 bar. Seat: 17,6 bar.
                                                                                                                      • Manufactured according to the requirements of the European Directive 2014/68/EU "Pressure Equipment" Module H

                                                                                                                      CONDITIONS OF SERVICE (EPDM):

                                                                                                                      • Maximum working pressure: 16 bar.
                                                                                                                      • Peak temperature: -10 °C / + 170 °C.
                                                                                                                      • Maximum working temperature: -20 °C / +200 °C.

                                                                                                                      £0.00Price
                                                                                                                      Carbon Steel Gate Valve. Rising Stem. ANSI 300Lbs RF
                                                                                                                          Gate Valves

                                                                                                                          GENERAL CHARACTERISTICS:

                                                                                                                          • Sizes: 14″ flywheel Ø 16″-24″ Gearbox
                                                                                                                          • Rising stem.
                                                                                                                          • Bolted bonnet.
                                                                                                                          • Fixed non-upward steering wheel
                                                                                                                          • TRIM 8 stellited seat lock
                                                                                                                          • One-piece flexible wedge.
                                                                                                                          • Grey paint. RAL 7001 60µm.

                                                                                                                          NORMATIVES :

                                                                                                                          • Manufacturing: ISO 9001 : 2008 and ISO 14001: 2004.
                                                                                                                          • EC Directive / Directive 2014/68/EU: EC No. 0036 Risk Category III module H.
                                                                                                                          • Pressure tests: API 598 Table 6.
                                                                                                                          • Length ASME B16.10, table 2 A 10 series and EN 558 series 4.
                                                                                                                          • ASME B16.05 Class 300 flanges.
                                                                                                                          • API 600 Design

                                                                                                                          CONDITIONS OF SERVICE (EPDM):

                                                                                                                          • Maximum working pressure: 50 bar.
                                                                                                                          • Maximum working temperature : -29°C / +425°C.

                                                                                                                          £0.00Price
                                                                                                                          Wafer Butterfly Valve With PTFE Seat PN16
                                                                                                                              Butterfly Valves - Techflow

                                                                                                                              GENERAL CHARACTERISTICS:

                                                                                                                              • Wafer valves with a centered shaft.
                                                                                                                              • Range from DN32/40 to DN300.
                                                                                                                              • Two-way shutdown.
                                                                                                                              • 100% watertightness.
                                                                                                                              • 9-position lever up to DN200.
                                                                                                                              • ISO 5211 mounting plate.
                                                                                                                              • Paint: Rilsan RAL 5024 of 250 microns.
                                                                                                                              • PTFE seat with 3 mm thickness and 6 mm silicone seal.

                                                                                                                              NORMATIVES :

                                                                                                                              • Manufacturing:ISO 9001: 2015.
                                                                                                                              • Distance between faces: EN 558-1 Series 20.
                                                                                                                              • Mounting between flanges: EN1092-1 PN10/16 - ANSI150.
                                                                                                                              • Leakage tests :: ISO 5208 Rate A

                                                                                                                              CONDITIONS OF SERVICE (EPDM):

                                                                                                                              • Maximum working pressure DN32/40 to DN150: 16 bar
                                                                                                                              • Maximum working pressure DN200-DN300: 10 bar.
                                                                                                                              • Maximum working temperature: - 25 °C / +200 °C.

                                                                                                                              £0.00Price
                                                                                                                              V. Gate A.Inox CF8M/316 PN-16 Thread BSP
                                                                                                                                  Gate Valves

                                                                                                                                  GENERAL CHARACTERISTICS:

                                                                                                                                  • Full step.
                                                                                                                                  • Non-ascent rotating spindle.
                                                                                                                                  • Internal threaded spindle.
                                                                                                                                  • Threaded bonnet.
                                                                                                                                  • Metal-to-metal seal.
                                                                                                                                  • Solid wedge.

                                                                                                                                  NORMATIVES :

                                                                                                                                  • Manufacturing: ISO 9001 : 2015.
                                                                                                                                  • Directive EC 2014/68/EU: EC No. 0036 Risk Category I Module A2
                                                                                                                                  • Pressure tests:: EN 12266-1 Class A.
                                                                                                                                  • BSP female thread ISO 228/1

                                                                                                                                  CONDITIONS OF SERVICE (EPDM):

                                                                                                                                  • Maximum working pressure: 16 bar.
                                                                                                                                  • Maximum working temperature : -20°C / +180°C.

                                                                                                                                  £0.00Price