Filter By
Best Products
Featured Products
Our Blog
Application Areas

There are 44 products.

Showing 1-44 of 44 item(s)

Active filters

WEICON Thread Sealing Cord DF 175
      Thread Sealing Cord
      WEICON DF 175 is a patented thread sealing cord made of 100% PTFE that seals almost all metal and plastic threads permanently and safely. WEICON DF 175 reliably compensates the intermediate space on the threads and creates a PTFE film in the required thickness during the screwing procedure. This film is extremely resistant to almost all chemicals, even the most aggressive solvents, caustic agents, and acids. WEICON DF 175 is non-flammable and operates reliably in a temperature range from -200°C (-328°F) to +240°C (+464°F). In contrast to other sealing materials, for which the fabric solely acts as a base for the actual sealant, WEICON DF 175 itself is the sealing material. A separation of the base material and the sealing material over the service life of the screw connection is thus excluded. Weicon DF 175 is durable for an unlimited period of time and stays permanently soft and elastic. WEICON DF 175 is very economical: One roll replaces up to 20 rolls of PTFE tape (12 mm x 0,1 mm x 12 m).
      £15.93Price
      WEICON Plast-o-Seal® 300 g
          Universal Sealant
          For sealing the smooth treated flanges of machine, gearbox and motor casing flanges. It can be used on hot as well as cold surfaces. To improve the performance of both old and new gaskets made from paper, cork, felt etc. Solvent-free, free of silicone, odourless, remains permanently plastic, both before and after assembly, easy joint dismantling, non corrosive, no dripping, very good resistance to most fuels, mineral oils, water, air, coolant mixtures based on methanol and glycol, antifreezes, kerosene, fluorocarbon refrigerants etc.
          £34.02Price
          WEICON Plast-o-Seal® 230 g
              Universal Sealant
              For sealing the smooth treated flanges of machine, gearbox and motor casing flanges. It can be used on hot as well as cold surfaces. To improve the performance of both old and new gaskets made from paper, cork, felt etc. Solvent-free, free of silicone, odourless, remains permanently plastic, both before and after assembly, easy joint dismantling, non corrosive, no dripping, very good resistance to most fuels, mineral oils, water, air, coolant mixtures based on methanol and glycol, antifreezes, kerosene, fluorocarbon refrigerants etc.
              £43.65Price
              WEICON Plast-o-Seal® 120 g
                  Universal Sealant
                  For sealing the smooth treated flanges of machine, gearbox and motor casing flanges. It can be used on hot as well as cold surfaces. To improve the performance of both old and new gaskets made from paper, cork, felt etc. Solvent-free, free of silicone, odourless, remains permanently plastic, both before and after assembly, easy joint dismantling, non corrosive, no dripping, very good resistance to most fuels, mineral oils, water, air, coolant mixtures based on methanol and glycol, antifreezes, kerosene, fluorocarbon refrigerants etc.
                  £14.40Price
                  WEICON Plast-o-Seal® 90 g
                      Universal Sealant
                      For sealing the smooth treated flanges of machine, gearbox and motor casing flanges. It can be used on hot as well as cold surfaces. To improve the performance of both old and new gaskets made from paper, cork, felt etc. Solvent-free, free of silicone, odourless, remains permanently plastic, both before and after assembly, easy joint dismantling, non corrosive, no dripping, very good resistance to most fuels, mineral oils, water, air, coolant mixtures based on methanol and glycol, antifreezes, kerosene, fluorocarbon refrigerants etc.
                      £10.71Price
                      WEICON Corro-Protection 28 L
                          Corrosion Protection Agent

                          WEICON Corro-Protection is a protective film approved by the German TÜV. It lastingly preserves tools and precision components with a dry and waxy layer. Corro-Protection can be used as safe corrosion protection for bare, unpainted metal parts, for the indoor storage of work-pieces, as corrosion protection during overseas transport and for the conservation of tools and precision components. The protective layer can be removed easily (e.g. with WEICON Cleaner S).

                          £523.80Price
                          WEICON Corro-Protection 10 L
                              Corrosion Protection Agent
                              WEICON Corro-protection is a protective film approved by the German TÜV. It lastingly preserves tools and precision components with a dry and waxy layer. Corro-Protection can be used as safe corrosion protection for bare, unpainted metal parts, for the indoor storage of work-pieces, as corrosion protection during overseas transport and for the conservation of tools and precision components. The protective layer can be removed easily (e.g. with WEICON Cleaner S).
                              £205.20Price
                              WEICON Corro-Protection 5 L
                                  Corrosion Protection Agent
                                  WEICON Corro-protection is a protective film approved by the German TÜV. It lastingly preserves tools and precision components with a dry and waxy layer. Corro-Protection can be used as safe corrosion protection for bare, unpainted metal parts, for the indoor storage of work-pieces, as corrosion protection during overseas transport and for the conservation of tools and precision components. The protective layer can be removed easily (e.g. with WEICON Cleaner S).
                                  £108.90Price
                                  WEICON Corro-Protection 1 L
                                      Corrosion Protection Agent

                                      WEICON Corro-protection is a protective film approved by the German TÜV. It lastingly preserves tools and precision components with a dry and waxy layer. Corro-Protection can be used as safe corrosion protection for bare, unpainted metal parts, for the indoor storage of work-pieces, as corrosion protection during overseas transport and for the conservation of tools and precision components. The protective layer can be removed easily (e.g. with WEICON Cleaner S).

                                      £32.63Price
                                      WEICON Sealant and Adhesive Remover 28 L
                                          Selant and Adhesive Remover
                                          Removes residues of hardened sealants and adhesives as well as lacquers and paints. Can be used on metal, wood, glass, ceramics, polyethylene and polypropylene (even on vertical surfaces). It should not be used on sensitive plastics such as PVC, synthetics, linoleum, etc. Do not spray with WEICON WSD 400 and WSP 1500. Just for painting/brushing.
                                          £521.10Price
                                          WEICON Sealant and Adhesive Remover 10 L
                                              Selant and Adhesive Remover
                                              Removes residues of hardened sealants and adhesives as well as lacquers and paints. Can be used on metal, wood, glass, ceramics, polyethylene and polypropylene (even on vertical surfaces). It should not be used on sensitive plastics such as PVC, synthetics, linoleum, etc. Do not spray with WEICON WSD 400 and WSP 1500. Just for painting/brushing.
                                              £199.35Price
                                              WEICON Sealant and Adhesive Remover 5 L
                                                  Selant and Adhesive Remover
                                                  Removes residues of hardened sealants and adhesives as well as lacquers and paints. Can be used on metal, wood, glass, ceramics, polyethylene and polypropylene (even on vertical surfaces). It should not be used on sensitive plastics such as PVC, synthetics, linoleum, etc. Do not spray with WEICON WSD 400 and WSP 1500. Just for painting/brushing.
                                                  £105.30Price
                                                  WEICON Sealant and Adhesive Remover 1 L
                                                      Selant and Adhesive Remover
                                                      Removes residues of hardened sealants and adhesives as well as lacquers and paints. Can be used on metal, wood, glass, ceramics, polyethylene and polypropylene (even on vertical surfaces). It should not be used on sensitive plastics such as PVC, synthetics, linoleum, etc. Do not spray with WEICON WSD 400 and WSP 1500. Just for painting/brushing.
                                                      £31.28Price
                                                      WEICON Electro Contact Cleaner 28 L
                                                          Electro Contact Cleaner
                                                          WEICON Electro Contact Cleaner is a special cleaner for the fast and effective cleaning and degreasing of all kinds of soiled or corroded contacts. It was specially developed for the cleaning of electronic and mechanical components. The special formula with high-purity solvents removes oxide/sulphide layers, combustion residues and resinous or sooty soiling. WEICON Electro Contact Cleaner reduces voltage loss and increases electric conductivity. Contamination that can cause tracking current is removed. WEICON Electro Contact Cleaner can be used on electrotechnical or mechanical components, such as electrical machines, measuring instruments, tools, balances, switches and sensors or electrical connections, contacts, relays and switchboards.
                                                          £432.00Price
                                                          WEICON Electro Contact Cleaner 10 L
                                                              Electro Contact Cleaner
                                                              WEICON Electro Contact Cleaner is a special cleaner for the fast and effective cleaning and degreasing of all kinds of soiled or corroded contacts. It was specially developed for the cleaning of electronic and mechanical components. The special formula with high-purity solvents removes oxide/sulphide layers, combustion residues and resinous or sooty soiling. WEICON Electro Contact Cleaner reduces voltage loss and increases electric conductivity. Contamination that can cause tracking current is removed. WEICON Electro Contact Cleaner can be used on electrotechnical or mechanical components, such as electrical machines, measuring instruments, tools, balances, switches and sensors or electrical connections, contacts, relays and switchboards.
                                                              £157.05Price
                                                              WEICON Electro Contact Cleaner 5 L
                                                                  Electro Contact Cleaner
                                                                  WEICON Electro Contact Cleaner is a special cleaner for the fast and effective cleaning and degreasing of all kinds of soiled or corroded contacts. It was specially developed for the cleaning of electronic and mechanical components. The special formula with high-purity solvents removes oxide/sulphide layers, combustion residues and resinous or sooty soiling. WEICON Electro Contact Cleaner reduces voltage loss and increases electric conductivity. Contamination that can cause tracking current is removed. WEICON Electro Contact Cleaner can be used on electrotechnical or mechanical components, such as electrical machines, measuring instruments, tools, balances, switches and sensors or electrical connections, contacts, relays and switchboards.
                                                                  £77.85Price
                                                                  WEICON Electro Contact Cleaner 1 L
                                                                      Electro Contact Cleaner
                                                                      WEICON Electro Contact Cleaner is a special cleaner for the fast and effective cleaning and degreasing of all kinds of soiled or corroded contacts. It was specially developed for the cleaning of electronic and mechanical components. The special formula with high-purity solvents removes oxide/sulphide layers, combustion residues and resinous or sooty soiling. WEICON Electro Contact Cleaner reduces voltage loss and increases electric conductivity. Contamination that can cause tracking current is removed. WEICON Electro Contact Cleaner can be used on electrotechnical or mechanical components, such as electrical machines, measuring instruments, tools, balances, switches and sensors or electrical connections, contacts, relays and switchboards.
                                                                      £26.78Price
                                                                      WEICON Workshop Cleaner 500 ml
                                                                          Workshop Cleaner
                                                                          WEICON Workshop Cleaner cleans and degreases all metals, plastics, types of rubber, glass, ceramics and wood. Powerfully removes grease, oil, resin, soot, wax, nicotine, insect dirt, bitumen and tar splashes. Workshop Cleaner is free of solvent, emulsifier and phosphate compatible with oil separators (ÖNORM B 5105) and, in accordance with EC-guidelines, bio-degradable. It is highly concentrated and can be diluted with water on a ratio of 1:40 (max). It contains selected foamless tensides and, in addition to manual cleaning, can be used in high-pressure cleaners, part washing machines and spray apparatuses (e.g. Pump Dispenser WPS 1500). Special ingredients provide temporary corrosion protection.
                                                                          £11.25Price
                                                                          WEICON Workshop Cleaner 28 L
                                                                              Workshop Cleaner
                                                                              WEICON Workshop Cleaner cleans and degreases all metals, plastics, types of rubber, glass, ceramics and wood. Powerfully removes grease, oil, resin, soot, wax, nicotine, insect dirt, bitumen and tar splashes. Workshop Cleaner is free of solvent, emulsifier and phosphate compatible with oil separators (ÖNORM B 5105) and, in accordance with EC-guidelines, bio-degradable. It is highly concentrated and can be diluted with water on a ratio of 1:40 (max). It contains selected foamless tensides and, in addition to manual cleaning, can be used in high-pressure cleaners, part washing machines and spray apparatuses (e.g. Pump Dispenser WPS 1500). Special ingredients provide temporary corrosion protection.
                                                                              £324.45Price
                                                                              WEICON Workshop Cleaner 10 L
                                                                                  Workshop Cleaner
                                                                                  WEICON Workshop Cleaner cleans and degreases all metals, plastics, types of rubber, glass, ceramics and wood. Powerfully removes grease, oil, resin, soot, wax, nicotine, insect dirt, bitumen and tar splashes. Workshop Cleaner is free of solvent, emulsifier and phosphate compatible with oil separators (ÖNORM B 5105) and, in accordance with EC-guidelines, bio-degradable. It is highly concentrated and can be diluted with water on a ratio of 1:40 (max). It contains selected foamless tensides and, in addition to manual cleaning, can be used in high-pressure cleaners, part washing machines and spray apparatuses (e.g. Pump Dispenser WPS 1500). Special ingredients provide temporary corrosion protection.
                                                                                  £120.60Price
                                                                                  WEICON Workshop Cleaner 5 L
                                                                                      Workshop Cleaner
                                                                                      WEICON Workshop Cleaner cleans and degreases all metals, plastics, types of rubber, glass, ceramics and wood. Powerfully removes grease, oil, resin, soot, wax, nicotine, insect dirt, bitumen and tar splashes. Workshop Cleaner is free of solvent, emulsifier and phosphate compatible with oil separators (ÖNORM B 5105) and, in accordance with EC-guidelines, bio-degradable. It is highly concentrated and can be diluted with water on a ratio of 1:40 (max). It contains selected foamless tensides and, in addition to manual cleaning, can be used in high-pressure cleaners, part washing machines and spray apparatuses (e.g. Pump Dispenser WPS 1500). Special ingredients provide temporary corrosion protection.
                                                                                      £60.75Price
                                                                                      WEICON Workshop Cleaner 1 L
                                                                                          Workshop Cleaner
                                                                                          WEICON Workshop Cleaner cleans and degreases all metals, plastics, types of rubber, glass, ceramics and wood. Powerfully removes grease, oil, resin, soot, wax, nicotine, insect dirt, bitumen and tar splashes. Workshop Cleaner is free of solvent, emulsifier and phosphate compatible with oil separators (ÖNORM B 5105) and, in accordance with EC-guidelines, bio-degradable. It is highly concentrated and can be diluted with water on a ratio of 1:40 (max). It contains selected foamless tensides and, in addition to manual cleaning, can be used in high-pressure cleaners, part washing machines and spray apparatuses (e.g. Pump Dispenser WPS 1500). Special ingredients provide temporary corrosion protection.
                                                                                          £21.15Price
                                                                                          WEICON Compressed-Air Spray 400 ml
                                                                                              Compressed-Air Spray
                                                                                              WEICON Compressed-Air Spray can be used wherever dust cannot be easily removed by conventional methods and on parts which are difficult to reach. It allows dry and contact-free cleaning of inaccessible corners and sensitive surfaces. Compressed-Air Spray can be used on HiFi and video devices (e.g. modules, circuit boards, magnetic heads, hard drives etc.), in optics (e.g. on cameras, objectives, lenses), on car fuse boxes and wiper units, on clockworks (quartz clocks), in medical technology, model making, measurement technology, on electronic components and circuit boards.
                                                                                              £12.20Price
                                                                                              WEICON Corro-Protection 400 ml
                                                                                                  Corrosion Protection Agent

                                                                                                  WEICON Corro-Protection is a transparent protective film approved by the German TÜV. It permanently preserves tools and precision components with a dry and waxy layer. WEICON Corro Protection can be used as safe corrosion protection for bare, unpainted metal parts, for the indoor storage of work-pieces, as corrosion protection during overseas transport and for the conservation of tools and precision components. The protective layer can be removed easily (e.g. with WEICON Cleaner S).

                                                                                                  £8.24Price
                                                                                                  WEICON Silicone Fluid 400 ml
                                                                                                      Silicone Fluid

                                                                                                      WEICON Silicone-Fluid is a special, physiologically harmless sliding agent and lubricant for sensitive areas. It has an NSF H1 approval for the food industry, and can therefore be used in the food and beverage industry and in the pharmaceuticals and cosmetics industries. It can also be used as release, protective and care agent on many different surfaces like plastics, metal, stainless steel and rubber. Silicone-Fluid has a durable and good surface quality and is temperature-resistant up to +250°C (+482°F). Due to its special formula and the resulting NSF H1 approval, it helps to improve workplace safety and health protection.

                                                                                                      £10.13Price
                                                                                                      WEICON PTFE-Fluid 400 ml
                                                                                                          PTFE-Fluid

                                                                                                          WEICON PTFE-Fluid is a special dry lubricant with strong anti-adhesive effect, and has an NSF registration for the food industry. Therefore, it can be used in the food and beverage industry and in the pharmaceuticals and cosmetics industries. Due to its high PTFE content, the spray offers sliding properties which help to reduce the friction coefficient of the coated surfaces significantly. PTFE Fluid is grease-free and adheres to all metal, plastic and wooden surfaces. The coating repels dirt, dust and water and is resistant to oils, greases and many chemicals. Due to its special formula and the resulting NSF registration, WEICON PTFE Fluid can contribute towards the improvement of workplace safety and health protection. The spray can be used as permanent lubrication in many sensitive industrial areas such as on sliding and running rails and guides, on conveyor belts, transport rollers and slides, on tilt mechanisms, locks and hinges, on cutting tools and packaging machines, for shafts in plastic bearings and as a coating for solid seals, and assembly aids for seal packs.

                                                                                                          £15.08Price
                                                                                                          WEICON Visor Cleaner 200 ml
                                                                                                              Visor Cleaner
                                                                                                              WEICON Visor Cleaner is a special cleaner for the cleaning and care of sensitive plastic and glass surfaces. It is antistatic and antireflective, reduces dazzling, and improves sight. It gently removes contamination caused by insects, dirt, dust, grease and nicotine without leaving streaks. WEICON Visor Cleaner can be used on all kinds of visors, on welding face shields, safety goggles, vision protection, safety glass, plastic housings on CNC machines, printers, scanners etc., and on all other plastic and glass surfaces.
                                                                                                              £7.29Price
                                                                                                              WEICON Electro Contact Cleaner 400 ml
                                                                                                                  Electro Contact Cleaner

                                                                                                                  WEICON Electro Contact Cleaner is a special cleaner for the fast and effective cleaning and degreasing of all kinds of soiled or corroded contacts. It was specially developed for the cleaning of electronical and mechanical components. The special formula with high-purity solvents removes oxide/sulphide layers, combustion residues and resinous or sooty soiling. WEICON Electro Contact Cleaner reduces voltage loss and increases electric conductivity. Contamination that can cause tracking current is removed. WEICON Electro Contact Cleaner can be used on electrotechnical or mechanical components, such as electrical machines, measuring instruments, tools, balances, switches and sensors or electrical connections, contacts, relays and switchboards.

                                                                                                                  £9.63Price
                                                                                                                  WEICON Sealant and Adhesive Remover 400 ml
                                                                                                                      Selant and Adhesive Remover

                                                                                                                      WEICON Sealant and Adhesive Remover quickly and easily removes residues of hardened sealants and adhesives as well as lacquers and paints, even from vertical surfaces. WEICON Sealant and Adhesive Remover can be used on metal, wood, glass, ceramics, polyethylene and polypropylene. It should not be used on sensitive plastics such as PVC, synthetics, linoleum, etc. Sealant and Adhesive Remover loosens all kinds of sealant residues on cylinder heads, oil sumps, water pumps, exhaust manifolds, valve covers and gearbox flanges. It reliably removes oil carbon residues, paints and lacquers, and eliminates oils, resins, greases and tar. It can also be used as a paint stripper for wood restoration and removes all kinds of adhesives, even cured cyanoacrylate and anaerobic adhesives.

                                                                                                                      £8.69Price
                                                                                                                      WEICON Brass Spray 400 ml
                                                                                                                          Brass Spray

                                                                                                                          WEICON Brass Spray is a metallic coating with a high brass content and a typical brass colour shade. For the protection and optical refinement of various materials. WEICON Brass Spray can be used in restoration works, for decorative purposes, in arts and crafts, hobby and do-it-yourself applications. It is suited for the sustainable repair of yellow chrome-plated parts which have been damaged by drilling, welding or milling.

                                                                                                                          £13.77Price
                                                                                                                          WEICON Copper Spray 400 ml
                                                                                                                              Copper Spray
                                                                                                                              WEICON Copper Spray is a high-quality, weather-resistant metal spray with high adhesive strength and a high copper content for protective and decorative coatings with an appealing non-ferrous metal character for indoor and outdoor use. It is even used for the optical refinement (copper-plating) of various material surfaces or design parts. Copper Spray can be used on window sills, gutters and downspouts, outdoor lights and mailboxes, as well as for arts and crafts and decorative work.
                                                                                                                              £13.77Price
                                                                                                                              WEICON Zinc Spray 400 ml
                                                                                                                                  Zinc Spray

                                                                                                                                  WEICON Zinc Spray is approved by the German TÜV and provides a long-lasting cathodic corrosion protection to all metal surfaces. The spray forms a fast-drying, adherent protective layer of microfine zinc flakes.

                                                                                                                                  In the salt spray test according to DIN EN ISO 9227, metal parts coated with WEICON Zinc Spray did not show any signs of corrosion after more than 1050 hours. The zinc flakes form a resistant protective layer, even under extreme weather and environmental conditions.

                                                                                                                                  Zinc Spray thus fulfils higher requirements than those defined by the DIN EN ISO 1461 standard. WEICON Zinc Spray can be used as a high-grade anti-rust primer, for the coating of welded joints and drilled holes, as a conductive intermediate layer for spot welding and wherever metal must be protected against corrosion.

                                                                                                                                  £12.42Price
                                                                                                                                  WEICON Zinc Spray bright grade 400 ml
                                                                                                                                      Zinc Spray

                                                                                                                                      WEICON Zinc Spray bright grade is TÜV-tested, provides all metal surfaces with a long-lasting cathodic corrosion protection and has a light coulour shade which matches fresh hot-dip galvanized coatings.

                                                                                                                                      The spray forms a fast-drying, adherent protective layer of microfine zinc flakes. The zinc flakes form a resistant protective layer, even under extreme weather and environmental conditions. In the salt spray test according to DIN EN ISO 9227, metal parts coated with WEICON Zinc Spray bright grade did not show any signs of corrosion after more than 550 hours.

                                                                                                                                      Zinc Spray „bright grade“ can be used for the coating of welded joints and drilled holes, as a conductive intermediate layer for spot welding and everywhere where metal must be protected against corrosion.

                                                                                                                                      £12.69Price
                                                                                                                                      WEICON Casting Resin MS 1000 1.0 kg
                                                                                                                                          Casting Resin

                                                                                                                                          WEICON MS 1000 Casting Resin is suitable for the most diverse applications, such as for casting electrical components, and can be blended by various fillers (in form of powder, fibres and fabric), e.g. for the production of highly filled backfilling compounds. WEICON MS 1000 Casting Resin can be used in the electrical industry, in machine construction and in many other applications.

                                                                                                                                          £49.95Price
                                                                                                                                          WEICON Casting Resin MS 1000 0.2 kg
                                                                                                                                              Casting Resin

                                                                                                                                              WEICON MS 1000 Casting Resin is suitable for the most diverse applications, such as for casting electrical components, and can be blended by various fillers (in form of powder, fibres and fabric), e.g. for the production of highly filled backfilling compounds. WEICON MS 1000 Casting Resin can be used in the electrical industry, in machine construction and in many other applications.

                                                                                                                                              £21.87Price
                                                                                                                                              WEICON Epoxy Resin Putty 800 g
                                                                                                                                                  Epoxy Resin Putty
                                                                                                                                                  WEICON Epoxy Resin Putty is pasty (kneadable), mineral-filled, and temperature-resistant up to +200°C (+392°F). It is processed with a mixing ratio of 1:1 and is machinable and paintable after curing. It adheres to metal, wood, glass, rubber, ceramics, concrete and most plastics and is resistant to petrol, oil, ester, saltwater and most acids and lyes. The product is suited for the sealing of pipelines and tanks, the fastening of screws and hooks, the reconditioning and repair of castings, the rebuilding of shafts, slide bearings, pumps and housings, the renewal of defective threads, the production of templates and models, and for repair works on aluminium, light metal and injection moulded parts. WEICON Epoxy Resin Putty can be used in machine construction, tool construction, model and mould making, and in many other industrial applications.
                                                                                                                                                  £36.90Price
                                                                                                                                                  WEICON Epoxy Resin Putty 400 g
                                                                                                                                                      Epoxy Resin Putty
                                                                                                                                                      WEICON Epoxy Resin Putty is pasty (kneadable), mineral-filled, and temperature-resistant up to +200°C (+392°F). It is processed with a mixing ratio of 1:1 and is machinable and paintable after curing. It adheres to metal, wood, glass, rubber, ceramics, concrete and most plastics and is resistant to petrol, oil, ester, saltwater and most acids and lyes. The product is suited for the sealing of pipelines and tanks, the fastening of screws and hooks, the reconditioning and repair of castings, the rebuilding of shafts, slide bearings, pumps and housings, the renewal of defective threads, the production of templates and models, and for repair works on aluminium, light metal and injection moulded parts. WEICON Epoxy Resin Putty can be used in machine construction, tool construction, model and mould making, and in many other industrial applications.
                                                                                                                                                      £22.86Price
                                                                                                                                                      WEICON Epoxy Resin Putty 100 g
                                                                                                                                                          Epoxy Resin Putty
                                                                                                                                                          WEICON Epoxy Resin Putty is pasty (kneadable), mineral-filled, and temperature-resistant up to +200°C (+392°F). It is processed with a mixing ratio of 1:1 and is machinable and paintable after curing. It adheres to metal, wood, glass, rubber, ceramics, concrete and most plastics and is resistant to petrol, oil, ester, saltwater and most acids and lyes. The product is suited for the sealing of pipelines and tanks, the fastening of screws and hooks, the reconditioning and repair of castings, the rebuilding of shafts, slide bearings, pumps and housings, the renewal of defective threads, the production of templates and models, and for repair works on aluminium, light metal and injection moulded parts. WEICON Epoxy Resin Putty can be used in machine construction, tool construction, model and mould making, and in many other industrial applications.
                                                                                                                                                          £12.24Price