Filter By

Categories

Categories

Best Products
Our Blog
Plastic and Corrosion Free

There are 64 products.

Showing 1-54 of 64 item(s)

Active filters

ProScan Radar Level SensorProScan Radar Level Sensor
      Radar Level Sensors

      CONTACT US FOR PRICE AND AVAILABILITY

      The ProScan Radar Level Sensor measures the liquid level inside a tank or sump by using a completely PTFE Teflon antenna or horn that sends and receives low energy radar pulses. The sensor is mounted to the top of the tank and the pulsed signal is reflected off the liquid surface, the echo (returned signal) is then picked up or received by the transmitters antenna. The time it takes is compared to known laws of physics (speed of light), once this is done the distance can be determined, and very accurately measured.

      The ProScan radar level transmitterdoes not contact the process liquid and therefore is an excellent choice for applications that may be corrosive, coating, dirty, or crystallizing. The are temperature compensated over the entire range (-40-260°F) and can be used to measure liquid under pressure or in a vacuum. The ProScan Series is both reliable and accurate; there is no requirement for re-calibration, and virtually zero maintenance as there are no moving parts.

      The ProScan utilizes a special microprocessor technology and mapping software that allows it to be used where other non-contact level sensing products fail or go lost i.e. Ultrasonics on Foam, Vapor, Condensate or Turbulence.

      Features:

          PTFE Teflon Antenna (Horn)
          Low Profile
          Simple Programming
          Suitable for Foam | Vapor
          IP67 Housing
          Epoxy Coated
          4-20mA Loop Power

      £0.00Price
      CSS – High Level SensorCSS – High Level Sensor
          Liquid Level Switches

          CONTACT US FOR PRICE AND AVAILABILITY
          The CFL Float Level Sensor uses a plastic float that contains a magnet inside, the linear movement is in direct relation to the liquid level being measured. The movement of the float excites the divider circuit that is located inside of the stem which is then converted into a analog 4-20mA output signal.

          CSS – High Level Sensor

          £0.00Price
          CFL Float Level Sensor
              Float Level Sensors

              CONTACT US FOR PRICE AND AVAILABILITY

              The CFL Float Level Sensor uses a plastic float that contains a magnet inside, the linear movement is in direct relation to the liquid level being measured. The movement of the float excites the divider circuit that is located inside of the stem which is then converted into a analog 4-20mA output signal.

              £0.00Price
              100 Series Submersible Level Sensor100 Series Submersible Level Sensor
                  Submersible Level Sensors

                  CONTACT US FOR PRICE AND AVAILABILITY

                  The 100 Series Submersible Level Sensor provides continuous level measurement for both corrosive and non-corrosive liquids. These submersible hydrostatic transmitters have been designed for the toughest industrial applications. Unlike ultrasonic level transmitters, our liquid level sensors are completely unaffected by any foam, vapor, turbulence or condensate in the tank.

                  The 100 Series Tank Level Sensor works by sitting at the bottom of the tank and measuring the head pressure of the liquid pushing down on its ceramic sensing diaphragm. The only submersible level sensor with an integral molded weight to ensure the sensor will remain at the bottom and you will always receive an accurate, reliable reading.

                  These plastic level sensors have been engineered to be completely corrosion resistant. They are available in PVC, PP, PVDF and PTFE Teflon® making them the perfect chemical tank level sensors. All models come equipped with a Teflon® jacketed cable and a Kalrez® O-ring seal to ensure it stands up to the industry’s most corrosive chemicals.

                  Our Submersible Level Transmitters require no programming, have no moving parts and are engineered with a non-clogging design. They are the industry’s simplest, most reliable level sensors, making them the perfect solution for tough applications where ultrasonics will not preform.

                  Bundle the 100 Series with our TVL Local Display and our Remote Tank Monitoring Device for the complete tank level package.

                  £0.00Price
                  LD Leak Detection SensorLD Leak Detection Sensor
                      Leak Detection

                      CONTACT US FOR PRICE AND AVAILABILITY

                      Features:

                          PP Body – PVC Cable
                          NPN / PNP Relay Output
                          NEMA 4X
                          Adjustable Sensitivity Setting

                      Applications:

                          Chemicals | Acids | Bases
                          Tank | Sump Leaks
                          Industrial Process Piping Leaks
                          Dosing Pump Skids-Pump | Fitting Leaks
                          Double Walled Tanks

                      £0.00Price
                      ProAlert 1000 Audible & Visual AlarmProAlert 1000 Audible & Visual Alarm
                          Alarms

                          CONTACT US FOR PRICE AND AVAILABILITY

                          Features:

                              Intensity Red Alarm Light
                              90 dB Audible Alarm with External
                              Silence-Normal Positions
                              NEMA 4X Industrial Design
                              NPN or PNP Pulse-5A Output
                              UL Listed Enclosure (CSA)
                              High Impact All Plastic Polycarbonate Shell
                              PR-Model-Relay On-Off Timer Included

                          Applications:

                              Low | High Level Alarm
                              Leak Detection
                              Flow Interruption
                              Temperature Upset Condition

                          £0.00Price
                          Sentinel Remote Tank Level Monitoring
                              Remote Tank Level Monitoring

                              CONTACT US FOR PRICE AND AVAILABILITY

                              The Sentinel Series is a Battery Operated Remote Tank Level Monitoring system that delivers reliable daily measurements that are both scheduled and event driven. Remote tank level monitoring with the Sentinel is exceptionally flexible, eliminating the hassles of network infrastructures and Internet service. The Telemetry device connects via a wireless signal to local cellular networks and transmits Level, Alarms, Battery Status, Rate of Consumption History, Critical High or Low Level Alerts and Signal Strength, all of which are available through the Sentinel Cloud Based Website. The Sentinel Remote Tank Level Monitoring unit provides you with important data readily at your fingertips on your Computer, Tablet or Smart Phone. The perfect solution for bulk chemical companies and large tank farms to save money on their logistics costs.

                              The Sentinel Series pairs well with our 100 Series Submersible Level Sensor and our TVL Series Liquid Level Display & Controller to provide you with the industry’s most reliable complete tank level monitoring package.



                              £0.00Price
                              TPP Liquid Temperature SensorTPP Liquid Temperature Sensor
                                  Liquid Temperature Sensors

                                  CONTACT US FOR PRICE AND AVAILABILITY
                                  Features:

                                      PFA | PTFE  Body
                                      Standard Range  0 – 100C | 32-212F
                                      Output | 4-20mA | 2 Wire Loop Powered
                                      NPT Connection
                                      High Accuracy± 0.5%

                                  Applications:

                                      Chemicals | Acids | Bases
                                      Tank Temperature
                                      Industrial Process Piping
                                      High | Low Temperature Detection

                                  £0.00Price
                                  OBS-GO Pressure Gauge
                                      Pressure Gauges

                                      CONTACT US FOR PRICE AND AVAILABILITY
                                      The OBS-GO Series Pressure Gauge is the industry’s most accurate pressure gauge on the market. With a Thermoplastic Polypropylene enclosure, OBS-GO Series gauges were engineered to last in the most corrosive environments.

                                      A ¼” NPT 316SS connection comes standard on all OBS-GO Pressure Gauges. This connection allows for them to be a perfect mate with our GI Series Gauge Guards when dealing with extremely corrosive chemicals. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator.

                                      OBS-GO Pressure Gauges come factory pre-filled, which is one of the main reasons we were able to achieve that industry leading accuracy of 0.75%. Each OBS-GO Pressure Gauge is also equipped with Color Range Tabs. These 3 movable red, yellow and green range tabs are designed to act as a visual pressure alert for bag or filter change-outs.

                                      £0.00Price
                                      OBS Pressure Gauge and Gauge GuardOBS Pressure Gauge and Gauge Guard
                                          Gauges combined with Gauge Guard

                                          CONTACT US FOR PRICE AND AVAILABILITY

                                          The OBS Series is the industry’s only integral molded one-piece plastic pressure gauge and gauge guard. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator. The OBS Series Pressure Gauges are truly unique and industry leading when it comes to pressure measurement in corrosive environments.

                                          OBS Pressure Gauges are a one-piece design and come factory pre-filled, resulting in an industry leading accuracy of 1.5%. Eliminating the need for filling saves the user time and the difficulty of having to fill a gauge isolator. The 3 movable red, yellow and green range tabs are designed to act as a visual pressure alert for bag or filter change-outs.

                                          The OBS Series is available in PVC, PP & PVDF, all equipped with a Teflon® Diaphragm, making the entire unit completely corrosion resistant and the perfect pressure gauge for chemical applications. Engineering the entire body in a plastic housing rather than just the gauge guard allows users to be confident that the complete unit will stand up in even the most corrosive environments.

                                          £0.00Price
                                          FES Plastic Flow Switch
                                              Liquid Flow Switches

                                              CONTACT US FOR PRICE AND AVAILABILITY

                                              The FES Series Flow Switch is designed to detect liquid Flow or Low | No Flow.

                                              The FES switch encompasses a SPST contact that can be wired to energize a device when liquid flow either exceeds or drops below the set flow rate. The FES Series is an excellent choice for corrosive liquid services, water treatment, waste treatment, liquid pumping and process control systems. The FES Flow Switch can control devices such as pumps, motorized valves and alarm devices.

                                              £0.00Price
                                              MF1000 Magnetic Flow MeterMF1000 Magnetic Flow Meter
                                                  Magnetic Flow Meters

                                                  The Truflo MF1000 Series Magnetic Flow Meters provide long-lasting, reliable performance in even the most challenging applications. The MF1000 is a microprocessor-based flow transmitter that has been engineered for high performance, easy installation, commissioning and maintenance. The transmitter is truly robust, cost-effective and suitable for all-round applications and has a measuring accuracy of ± 0.5% of the flow rate. The all-welded construction provides a hermetic seal that protects against moisture and other contaminants. The sealed housing ensures maximum sensor reliability by protecting all internal components and wiring from even the most aggressive environments.

                                                  The Truflo MF1000 Series Magnetic Flow Meter consists of sensor & converter. The measuring tube is equipped magnet exciting coil. The converter provide current to magnet exciting coil and generate magnetic field which filled measuring tube, one or more pairs of electrode which are fixed in inner-wall of the measuring tube(vertical to field direction) detect and lead to induced electromotive force after contact liquid, then delivery to converter through cable and do signal processing. Insulation lining is fixed in inner-wall of the
                                                  measuring tube, and make the measuring tube high resistant and nonmagnetic. Lining contacts with the measuring fluid, different causticity, abrasiveness and temperature of fluid choose different types of lining.

                                                  £0.00Price
                                                  ProPulse Turbine Flow Meter
                                                      Turbine Flow Meter

                                                      CONTACT US FOR PRICE AND AVAILABILITY

                                                      The ProPulse Turbine Flow Meter provides superior performance and delivers accurate Ultra Low Flow measurement that is highly repeatable under the most demanding of industrial environments. The ProPulse Series consists of one universal body that can be customized into six 5 selectable flow ranges. Changing from one flow range to another is simply achieved by inserting a very precise flow jet, no special tools required for change out …truly Plug and Play. The ProPulse operates using a PVDF rotor with encapsulated magnetic inserts which rotate on a long wearing set of sapphire bearings designed to provide years of reliability. As the rotor spins the magnetic field produced by the magnets is pick up via a Hall Effect Sensor which converts the rotation into a square wave NPN pulse output that can be sent directly to a metering pump or local display.

                                                      £0.00Price
                                                      UltraFlo 1000 Ultrasonic Flow Meter
                                                          Ultrasonic Flow Meters

                                                          CONTACT US FOR PRICE AND AVAILABILITY

                                                          The Ultraflo 1000 Ultrasonic Flow Meter utilizes ultrasonic technology to measure both conductive and non conductive liquids, and is an excellent choice for very corrosive liquids such as strong acids and alkalines. The UltraFlo 1000 has no moving parts and can measure pulsating, dosing and metering flow applications. All parts that contact the liquid are made of corrosion resistant PFA Teflon®. The UltraFlo 1000 Ultrasonic Flow Meter is characterized by its high measurement accuracy and repeatability.

                                                          £0.00Price
                                                          TIB Insertion Paddle Wheel Flow MeterTIB Insertion Paddle Wheel Flow Meter
                                                              Insertion Paddle Wheel Flow Meters

                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                              The TIB Series battery operated paddle wheel flow meter has been designed for tough industrial applications. The TIB series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for both corrosive and non-corrosive liquids. The plastic insertion flow meter is equipped with a 360° rotatable vivid backlit LCD display showing both Flow Rate & Flow Total. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                              Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TIB series battery operated liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                              The TIB insertion paddle wheel flow meter is available in PVC, PP and PVDF. The flow sensors can be installed into pipe sizes ½ – 24” using our line of comprehensive custom fittings. Icon’s complete line of insertion paddle wheel flow meters will also retrofit into any Signet® style fitting.

                                                              £0.00Price
                                                              TKB In-Line Paddle Wheel Flow MeterTKB In-Line Paddle Wheel Flow Meter
                                                                  In-line Paddle Wheel Flow Meters

                                                                  CONTACT US FOR PRICE AND AVAILABILITY


                                                                  The TKB Series battery operated paddle wheel flow meter has been designed for tough industrial applications. The TKB series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for both corrosive and non-corrosive liquids. The plastic in-line flow meter is equipped with a 360° rotatable vivid backlit LCD display showing both Flow Rate & Flow Total. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                                  Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TKB series battery operated liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                                  The TKB in-line paddle wheel flow meter incorporates a true-union design with body materials available in PVC, PP and PVDF. The TK3B Series Stainless Steel Flow Meter has a 316SS body and is available with NPT, flanged or sanitary end connections.

                                                                  £0.00Price
                                                                  MLR-70 Guided-Wave Radar Level SensorMLR-70 Guided-Wave Radar Level Sensor
                                                                      Radar Level Sensors

                                                                      CONTACT US FOR PRICE AND AVAILABILITY

                                                                      The MLR guided-wave radar level sensors are compact level measurement devices that include a transmitter that emits microwave pulses along a rod or wire rope electrode. The pulse propagates along the electrode in the form of electromagnetic wave toward the level surface, where it is reflected and the signal wave component is returned to the receiving module of the electronic housing. The on-board circuitry measures the time of flight of electromagnetic wave and the distance to the surface level is calculated. According to the level height, the level meter output is set and the measured value is shown on the display. Radar level meters are resistant against changes in the atmosphere (pressure, temperature, dust, steam) and to changes in medium parameters (change in dielectric constant and conductivity).

                                                                      Features:

                                                                          FEP Teflon® Coated Probe
                                                                          High Accuracy
                                                                          Simple Programming
                                                                          LCD Display
                                                                          IP67 Housing
                                                                          4-20mA Loop Powered
                                                                          Output signal: 4-20mA (Std) | 4-20mA+HART |
                                                                          Modbus | RS485

                                                                      Applications:

                                                                          Suitable for: Foam, Vapor, Condensate, Turbulence
                                                                          Liquid Chemical Storage
                                                                          Chemical Sumps

                                                                      £0.00Price
                                                                      UltraPro 1000 Ultrasonic Level SensorUltraPro 1000 Ultrasonic Level Sensor
                                                                          Ultrasonic Level Sensors

                                                                          CONTACT US FOR PRICE AND AVAILABILITY
                                                                          The UltraPro 1000 Ultrasonic level sensors are 2-Wire loop powered sensors designed to provide reliable, accurate level measurement, and
                                                                          volume of liquids in tanks, pits, sumps and open channels. The UltraPro level transmitters are very reliable and offer both 4-20mA analog output with HART® protocol or RS-485 Modbus.

                                                                          Key Applications include; Chemical Storage Tanks, Waste Sumps, Bulk Storage, Tanker Trucks, Day or Process Tanks and Chemical Feed. The UltraPro Series is designed to work with most types of remote instrumentation and provide enhanced functionality such as remote displays and remote monitoring solutions.

                                                                          Features:

                                                                              Local Visual Display Indication
                                                                              PVDF Transducer
                                                                              Narrow Beam Technology
                                                                              General Purpose | XP Explosion Proof
                                                                              2 Wire (4-20mA) + (HART) Output Signal
                                                                              Measuring Range: 4″-66 Ft
                                                                              Accuracy: 0.2%

                                                                          £0.00Price
                                                                          PLF Liquid Level Float SwitchPLF Liquid Level Float Switch
                                                                              Liquid Level Switches

                                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                                              The PLF Liquid Level Float Switch provides liquid level detection up to 10′(3m) with 1-8 level switch points and a compact
                                                                              junction box for wiring termination. This all plastic level switch package is selected for day tank, skid or machine, cooling tower, waste sump or process tank applications, and can be connected directly to a PLC or relay controller. It makes a perfect on | off switch for pumps or valves and can be used to completely automate your tank. The PLF is only suitable for non-viscous and non-coating liquids.

                                                                              £0.00Price
                                                                              200C Submersible Level Sensor200C Submersible Level Sensor
                                                                                  Submersible Level Sensors

                                                                                  CONTACT US FOR PRICE AND AVAILABILITY


                                                                                  The 200C Series Submersible Level Sensor provides continuous level measurement for both corrosive and non-corrosive liquids. These submersible hydrostatic transmitters have been designed for the toughest industrial applications. Unlike ultrasonic level transmitters, our liquid level sensors are completely unaffected by any foam, vapor, turbulence or condensate in the tank.

                                                                                  The 200C Series Tank Level Sensor works by sitting at the bottom of the tank and measuring the head pressure of the liquid pushing down on its ceramic sensing diaphragm. The only submersible level sensor with an integral molded weight to ensure the sensor will remain at the bottom and you will always receive an accurate, reliable reading.

                                                                                  These plastic level sensors have been engineered to be completely corrosion resistant. They are available in PVC, PP, PVDF and PTFE Teflon® making them the perfect chemical tank level sensors. All models come equipped with a Teflon® jacketed cable and a Kalrez® O-ring seal to ensure it stands up to the industry’s most corrosive chemicals.

                                                                                  Our Submersible Level Transmitters require no programming, have no moving parts and are engineered with a non-clogging design. They are the industry’s simplest, most reliable level sensors, making them the perfect solution for tough applications where ultrasonics will not preform.

                                                                                  Bundle the 200C Series with our TVL Local Display and our Remote Tank Monitoring Device for the complete tank level package.



                                                                                  £0.00Price
                                                                                  LDS Leak Detection SensorLDS Leak Detection Sensor
                                                                                      Leak Detection

                                                                                      CONTACT US FOR PRICE AND AVAILABILITY

                                                                                      Levelpro LDS-YN Industrial Series is an advanced all plastic corrosion resistant leak detection sensor that utilizes ultra-sensitive electrostatic technology which constantly and accurately senses the presence of liquids. These sensors are ideally suited for monitoring the interstitial area between double wall tanks, tank retention dikes, secondary containment sumps, and are where process pumps and valves are utilized. The LDS-YN sensor has been engineered to withstand even the most extreme conditions while including features designed to optimize performance and reduce maintenance. 

                                                                                      £0.00Price
                                                                                      PRD Pressure TransmitterPRD Pressure Transmitter
                                                                                          Pressure Sensors & Transmitters

                                                                                          CONTACT US FOR PRICE AND AVAILABILITY

                                                                                          Features:

                                                                                              Accuracy: 0.25%
                                                                                              PP | PVDF | 316SS
                                                                                              Ceramic Diaphragm
                                                                                              2 Relay Output (5 Amp)
                                                                                              4-20mA | RS485 (opt)
                                                                                              Alarm Status – Display Changes from Green to Red

                                                                                          £0.00Price
                                                                                          OBS-DGO Double Sided Pressure Gauge
                                                                                              Pressure Gauges

                                                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                                                              The OBS-DGO Series Pressure Gauge is double-sided and the industry’s most accurate pressure gauge on the market. With a Thermoplastic Polypropylene enclosure, OBS-DGO Series gauges were engineered to last in the most corrosive environments.

                                                                                              A ¼” NPT 316SS connection comes standard on all OBS-DGO Pressure Gauges. This connection allows for them to be a perfect mate with our GI Series Gauge Guards when dealing with extremely corrosive chemicals. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator.

                                                                                              OBS-DGO Pressure Gauges come factory pre-filled, which is one of the main reasons we were able to achieve that industry leading accuracy of 0.75%. Each OBS-DGO Pressure Gauge is also equipped with Color Range Tabs. These 3 movable red, yellow and green range tabs are designed to act as a visual pressure alert for bag or filter change-outs.

                                                                                              Features:

                                                                                                  Double Sided
                                                                                                  2 1/2″ Display
                                                                                                  Extra Large Colored Display
                                                                                                  Accuracy  0.75%
                                                                                                   No Filling Required
                                                                                                  Visual Pressure Range Tabs Red | Yellow | Green

                                                                                              Applications:

                                                                                                  Chemicals | Acids | Bases
                                                                                                  Process Pressure
                                                                                                  Strainer Clean-Out Notification
                                                                                                  Filter Bag Replacement Notification
                                                                                                   Pressure Leak Detection

                                                                                              £0.00Price
                                                                                              OBS-2VU Double Sided Pressure GaugeOBS-2VU Double Sided Pressure Gauge
                                                                                                  Gauges combined with Gauge Guard

                                                                                                  CONTACT US FOR PRICE AND AVAILABILITY
                                                                                                  The OB2-2VU Series is double sided and the industry’s only integral molded one-piece plastic pressure gauge and gauge guard. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator. The OBS Series Pressure Gauges are truly unique and industry leading when it comes to pressure measurement in corrosive environments.


                                                                                                  Features

                                                                                                      Industry’s First All Plastic Double Sided Gauge
                                                                                                      Heavy Duty Rugged Design; Simple to Install
                                                                                                      Completely Corrosion Resistant
                                                                                                      Designed to Act as Visual Pressure Alert
                                                                                                      Extra Large Colored Display
                                                                                                      Reduces Pressure Surges caused by Water
                                                                                                      Hammer or Metering Pump Pulsations Highest Accuracy in Industry 1.5%
                                                                                                      Factory Prefilled-Glycerin or Silicone
                                                                                                      No Filling Required
                                                                                                      One-Piece Molded Design (No Assembly)
                                                                                                      Suitable for Corrosive Media + Slurries

                                                                                                  £0.00Price
                                                                                                  Ultraflo 2000 Ultrasonic Flow Meter
                                                                                                      Ultrasonic Flow Meters

                                                                                                      The Ultraflo 2000 ultrasonic flow meter is designed to measure the volume of clean liquid media using ultrasonic technology. The Ultraflo 2000 can measure both conductive and non-conductive liquids. The Ultraflo 2000 ultrasonic flow meter has no moving parts and is perfect for measuring chemical dosing or pulsating flows. The unique body design minimizes dead space over the whole geometry. All wetted parts in contact with the medium are constructed of HDPE virgin material. The Ultraflo 2000 is characterized by its high repeatability and measurement accuracy.

                                                                                                      £0.00Price
                                                                                                      TIP Insertion Paddle Wheel Flow Meter
                                                                                                          Insertion Paddle Wheel Flow Meters

                                                                                                          CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                          The TIP Series digital paddle wheel flow meter has been designed for tough industrial applications. The TIP series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for both corrosive and non-corrosive liquids. The plastic insertion flow meter is equipped with a 360° rotatable vivid LED display showing both Flow Rate & Flow Total and provides a frequency pulse output. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                                                                          Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TIP series liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                                                                          The TIP insertion paddle wheel flow meter is available in PVC, PP and PVDF. The flow sensors can be installed into pipe sizes ½ – 24” using our line of comprehensive custom fittings. Icon’s complete line of insertion paddle wheel flow meters will also retrofit into any Signet® style fitting.

                                                                                                          £0.00Price
                                                                                                          TKP In-Line Paddle Wheel Flow MeterTKP In-Line Paddle Wheel Flow Meter
                                                                                                              In-line Paddle Wheel Flow Meters

                                                                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                              The TKP Series digital paddle wheel flow meter has been designed for tough industrial applications. The TKP series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for both corrosive and non-corrosive liquids. The plastic in-line flow meter is equipped with a 360° rotatable vivid LED display showing both Flow Rate & Flow Total and provides a frequency pulse output. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                                                                              Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TKP series liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                                                                              The TKP in-line paddle wheel flow meter incorporates a true-union design with body materials available in PVC, PP and PVDF. The TK3P Series Stainless Steel Flow Meter has a 316SS body and is available with NPT, flanged or sanitary end connections.


                                                                                                              £0.00Price
                                                                                                              ViewSonic Ultrasonic Level SensorViewSonic Ultrasonic Level Sensor
                                                                                                                  Ultrasonic Level Sensors

                                                                                                                  CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                  Features:

                                                                                                                      Battery Operated
                                                                                                                      Approx 5 Years Life Expectancy
                                                                                                                      Digital LCD Display
                                                                                                                      All Plastic Design
                                                                                                                      NEMA 4X Plastic PP Enclosure
                                                                                                                      Non-Contact Technology
                                                                                                                      Double Walled Tanks
                                                                                                                      Wireless Communication to remote display over 200ft
                                                                                                                      Remote Applications / No Wiring Required
                                                                                                                      Low / High Level Display Indication

                                                                                                                  Applications:

                                                                                                                      Chemical Storage
                                                                                                                      Chemical Sumps
                                                                                                                      Double-walled Tanks

                                                                                                                  £0.00Price
                                                                                                                  PLS Series Plastic Level SwitchesPLS Series Plastic Level Switches
                                                                                                                      Liquid Level Switches

                                                                                                                      CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                      The Levelpro PLS Series compact level switches combine low cost and reliability with fast, simple installation. The all plastic level switches contain an hermetically sealed reed switch that is actuated by magnets that are permanently bonded inside the float. They can be easily adapted to open or close a circuit based on the rising or falling of the liquid level. The switch action can be reversed by removing the float, rotating it end-for-end and replacing it on the stem. Vertical models mount internally, oriented within 45° of vertical, or select optional fittings for external mounting. Switch ratings are suitable for many solidstate control systems and small monitors or alarms. Simple relay interfaces can be used for higher current applications such as pumps and on-off valve actuators.

                                                                                                                      £0.00Price
                                                                                                                      300S Series Submersible Level Sensor300S Series Submersible Level Sensor
                                                                                                                          Submersible Level Sensors

                                                                                                                          CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                          The 300S Series Submersible Level Sensor provides continuous level measurement for both corrosive and non-corrosive liquids. These submersible hydrostatic transmitters have been designed for the toughest industrial applications. Unlike ultrasonic level transmitters, our liquid level sensors are completely unaffected by any foam, vapor, turbulence or condensate in the tank.

                                                                                                                          The 300S Series Tank Level Sensor works by sitting at the bottom of the tank and measuring the head pressure of the liquid pushing down on its stainless steel sensing diaphragm. The only submersible level sensor with an integral molded weight to ensure the sensor will remain at the bottom and you will always receive an accurate, reliable reading.

                                                                                                                          With a 316 stainless steel body, these level sensors have been engineered to handle some of the toughest applications. All models come equipped with a Teflon® jacketed cable and a Kalrez® O-ring seal to ensure it stands up to the industry’s most corrosive chemicals.

                                                                                                                          Our Submersible Level Transmitters require no programming, have no moving parts and are engineered with a non-clogging design. They are the industry’s simplest, most reliable level sensors, making them the perfect solution for tough applications where ultrasonics will not preform.

                                                                                                                          Bundle the 300S Series with our TVL Local Display and our Remote Tank Monitoring Device for the complete tank level package.

                                                                                                                          £0.00Price
                                                                                                                          PPS Pressure Transmitter
                                                                                                                              Pressure Sensors & Transmitters

                                                                                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                              Features:

                                                                                                                                  Accuracy: 0.25%
                                                                                                                                  PP | PVDF | 316SS
                                                                                                                                  Ceramic Diaphragm
                                                                                                                                  2 Relay Output (5 Amp)
                                                                                                                                  4-20mA | RS485 (opt)
                                                                                                                                  Alarm Status – Display Changes from Green to Re

                                                                                                                              £0.00Price
                                                                                                                              OBS-GO4 Pressure Gauge
                                                                                                                                  Pressure Gauges

                                                                                                                                  CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                  The OBS-GO4 Series Pressure Gauge features an extra large color display is the industry’s most accurate pressure gauge on the market. With a Thermoplastic Polypropylene enclosure, OBS-GO4 Series gauges were engineered to last in the most corrosive environments.

                                                                                                                                  A ¼” NPT 316SS connection comes standard on all OBS-GO4 Pressure Gauges. This connection allows for them to be a perfect mate with our GI Series Gauge Guards when dealing with extremely corrosive chemicals. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator.

                                                                                                                                  OBS-GO4 Pressure Gauges come factory pre-filled, which is one of the main reasons we were able to achieve that industry leading accuracy of 0.75%. Each OBS-GO4 Pressure Gauge is also equipped with Color Range Tabs. These 3 movable red, yellow and green range tabs are designed to act as a visual pressure alert for bag or filter change-outs.


                                                                                                                                  £0.00Price
                                                                                                                                  OBS BAG Series – 3 inch Gauge and Gauge GuardOBS BAG Series – 3 inch Gauge and Gauge Guard
                                                                                                                                      Gauges combined with Gauge Guard

                                                                                                                                      The OBS “BAG” Series is the industry’s only integral molded one-piece plastic pressure gauge and gauge guard that features a large 3″ dial. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator. The OBS Series Pressure Gauges are truly unique and industry leading when it comes to pressure measurement in corrosive environments.

                                                                                                                                      OBS Pressure Gauges are a one-piece design and come factory pre-filled, resulting in an industry leading accuracy of 1.5%. Eliminating the need for filling saves the user time and the difficulty of having to fill a gauge isolator. The 3 movable red, yellow and green range tabs are designed to act as a visual pressure alert for bag or filter change-outs.

                                                                                                                                      The OBS “BAG” Series is available in PVC, PP & PVDF, all equipped with a Teflon® Diaphragm, making the entire unit completely corrosion resistant and the perfect pressure gauge for chemical applications. Engineering the entire body in a plastic housing rather than just the gauge guard allows users to be confident that the complete unit will stand up in even the most corrosive environments.

                                                                                                                                      £0.00Price
                                                                                                                                      UltraFlo 4000 Ultrasonic Flow Meter
                                                                                                                                          Ultrasonic Flow Meters

                                                                                                                                          CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                          The UltraFlo 4000 utilizes ultrasonic technology as is capable of measuring both conductive and non conductive liquids, It is an excellent chose for very corrosive liquids such as strong acids and alkalies. The UltraFlo 4000 has no moving parts and has been engineered to measure pulsating, dosing as well as metering flow. All parts that contact the liquid are made of corrosion resistant Polysulfone.

                                                                                                                                          £0.00Price
                                                                                                                                          TIM Insertion Paddle Wheel Flow Meter
                                                                                                                                              Insertion Paddle Wheel Flow Meters

                                                                                                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                              The TIM Series digital paddle wheel flow meter has been designed for tough industrial applications. The TIM series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for both corrosive and non-corrosive liquids. The plastic insetion flow meter is equipped with a 360° rotatable vivid LED display showing both Flow Rate & Flow Total and provides a 4-20mA output. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                                                                                                              Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TIM liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                                                                                                              The TIM insertion paddle wheel flow meter is available in PVC, PP and PVDF. The flow sensors can be installed into pipe sizes ½ – 24” using our line of comprehensive custom fittings. Icon’s complete line of insertion paddle wheel flow meters will also retrofit into any Signet® style fitting.

                                                                                                                                              £0.00Price
                                                                                                                                              TKS In-Line Paddle Wheel Flow MeterTKS In-Line Paddle Wheel Flow Meter
                                                                                                                                                  In-line Paddle Wheel Flow Meters

                                                                                                                                                  CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                  The TKS Series digital paddle wheel flow meter has been designed for tough industrial applications. The TKS series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for both corrosive and non-corrosive liquids. The plastic in-line flow meter is equipped with a 360° rotatable vivid LED display showing Flow Rate and provides a pulse output and a 1 Amp relay. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                                                                                                                  Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TKS series liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                                                                                                                  The TKS in-line paddle wheel flow meter incorporates a true-union design with body materials available in PVC, PP and PVDF. The TK3S Series Stainless Steel Flow Meter has a 316SS body and is available with NPT, flanged or sanitary end connections.

                                                                                                                                                  £0.00Price
                                                                                                                                                  FloatPro Ball Float ValveFloatPro Ball Float Valve
                                                                                                                                                      Liquid Level Switches

                                                                                                                                                      CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                      Features:

                                                                                                                                                          PP All Plastic Body
                                                                                                                                                          1/2″ | 1″ | 1 1/2″ Size Ranges
                                                                                                                                                          5 Mounting Positions
                                                                                                                                                          Easy to Install
                                                                                                                                                          Low Cost Tank Monitoring

                                                                                                                                                      £0.00Price
                                                                                                                                                      TankPro Submersible Level SensorTankPro Submersible Level Sensor
                                                                                                                                                          Submersible Level Sensors

                                                                                                                                                          CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                          The TankPro Submersible Level Sensor provides continuous level measurement for both corrosive and non-corrosive liquids. These submersible hydrostatic transmitters have been designed for the toughest industrial applications. Unlike ultrasonic level transmitters, our liquid level sensors are completely unaffected by any foam, vapor, turbulence or condensate in the tank.

                                                                                                                                                          The TankPro Level Sensor works by sitting at the bottom of the tank and measuring the head pressure of the liquid pushing down on its ceramic sensing diaphragm. The only submersible level sensor with an integral molded weight to ensure the sensor will remain at the bottom and you will always receive an accurate, reliable reading.

                                                                                                                                                          These plastic level sensors have been engineered to be completely corrosion resistant. They are available in PVC, PP, PVDF and PTFE Teflon® making them the perfect chemical tank level sensors. All models come equipped with a Teflon® jacketed cable and a Kalrez® O-ring seal to ensure it stands up to the industry’s most corrosive chemicals.

                                                                                                                                                          Our Submersible Level Transmitters require no programming, have no moving parts and are engineered with a non-clogging design. They are the industry’s simplest, most reliable level sensors, making them the perfect solution for tough applications where ultrasonics will not preform.

                                                                                                                                                          Bundle the TankPro with our Remote Tank Monitoring Device for the complete tank level package.

                                                                                                                                                          £0.00Price
                                                                                                                                                          PPT Pressure Transmitter
                                                                                                                                                              Pressure Sensors & Transmitters

                                                                                                                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                              Features:

                                                                                                                                                                  Accuracy: 0.25%
                                                                                                                                                                  PP | PVDF | 316SS
                                                                                                                                                                  Ceramic Diaphragm
                                                                                                                                                                  2 Relay Output (5 Amp)
                                                                                                                                                                  4-20mA | RS485 (opt)
                                                                                                                                                                  Alarm Status – Display Changes from Green to Red

                                                                                                                                                              £0.00Price
                                                                                                                                                              OBS-V Vacuum Pressure Gauge
                                                                                                                                                                  Pressure Gauges

                                                                                                                                                                  CONTACT US FOR PRICE AND AVAILABILITYThe OBS-V Series Vacuum Pressure Gauge is the industry’s most accurate pressure gauge on the market designed for corrosive environments. With a Thermoplastic Polypropylene enclosure, OBS-V Series gauges were engineered to last in the most corrosive environments.

                                                                                                                                                                  A ¼” NPT 316SS connection comes standard on all OBS-V Pressure Gauges. This connection allows for them to be a perfect mate with our GI Series Gauge Guards when dealing with extremely corrosive chemicals. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator.

                                                                                                                                                                  OBS-V Pressure Gauges come factory pre-filled, which is one of the main reasons we were able to achieve that industry leading accuracy of 0.75%. Each OBS-V Pressure Gauge is also equipped with Color Range Tabs. These 3 movable red, yellow and green range tabs are designed to act as a visual pressure alert for bag or filter change-outs.

                                                                                                                                                                  £0.00Price
                                                                                                                                                                  OBS-R 360 SeriesOBS-R 360 Series
                                                                                                                                                                      Gauges combined with Gauge Guard

                                                                                                                                                                      The OBS-R 360 Series is the industry’s only integral molded one-piece plastic pressure gauge and gauge guard equipped with a 360 degree rotatable head. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator. The OBS Series Pressure Gauges are truly unique and industry leading when it comes to pressure measurement in corrosive environments.

                                                                                                                                                                      Features:

                                                                                                                                                                          360 Degree Full Rotation
                                                                                                                                                                          No Filling Required
                                                                                                                                                                          Pressure Range Tabs Red | Yellow | Green
                                                                                                                                                                          Highest Accuracy in Industry – 1.5%
                                                                                                                                                                          One-Piece Molded Design (No Assembly)

                                                                                                                                                                      £0.00Price
                                                                                                                                                                      UltraFlo 5000 Ultrasonic Flow Meter
                                                                                                                                                                          Ultrasonic Flow Meters

                                                                                                                                                                          CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                          Features:

                                                                                                                                                                              Simple to Install
                                                                                                                                                                              RS-485 Output, 4-20mA
                                                                                                                                                                              Display: Flow Rate + Totalizer
                                                                                                                                                                              4-20mA Output + Pulse Relay
                                                                                                                                                                              IP67 Enclosure
                                                                                                                                                                              Negligible Pressure Drop
                                                                                                                                                                              Empty Pipe Alarm

                                                                                                                                                                          £0.00Price
                                                                                                                                                                          TIW Insertion Paddle Wheel Flow MeterTIW Insertion Paddle Wheel Flow Meter
                                                                                                                                                                              Insertion Paddle Wheel Flow Meters

                                                                                                                                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                              The TIW Series paddle wheel flow meter has been designed for tough industrial applications. The TIW series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for both corrosive and non-corrosive liquids. The plastic insertion flow meter is a blind unit that provides a frequency pulse output and is available with a Hirschmann DIN quick disconnect or a flying lead. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                                                                                                                                              Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TIW liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                                                                                                                                              The TIW insertion paddle wheel flow meter is available in PVC, PP and PVDF. The flow sensors can be installed into pipe sizes ½ – 24” using our line of comprehensive custom fittings. Icon’s complete line of insertion paddle wheel flow meters will also retrofit into any Signet® style fitting.


                                                                                                                                                                              £0.00Price
                                                                                                                                                                              TKM In-Line Paddle Wheel Flow MeterTKM In-Line Paddle Wheel Flow Meter
                                                                                                                                                                                  In-line Paddle Wheel Flow Meters

                                                                                                                                                                                  CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                                  The TKM Series digital paddle wheel flow meter has been designed for tough industrial applications. The TKM series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for both corrosive and non-corrosive liquids. The plastic in-line flow meter is equipped with a 360° rotatable vivid LED display showing both Flow Rate & Flow Total and provides a 4-20mA output. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                                                                                                                                                  Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TKM series liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                                                                                                                                                  The TKM in-line paddle wheel flow meter incorporates a true-union design with body materials available in PVC, PP and PVDF. The TK3M Series Stainless Steel Flow Meter has a 316SS body and is available with NPT, flanged or sanitary end connections.

                                                                                                                                                                                  £0.00Price
                                                                                                                                                                                  NC-25 Plastic Level Switch
                                                                                                                                                                                      Liquid Level Switches

                                                                                                                                                                                      CONTACT US FOR PRICE AND AVAILABILITY
                                                                                                                                                                                      Features:

                                                                                                                                                                                          Fit a Wide Range of Tubing Diameters – 1/4″ to 1/2″
                                                                                                                                                                                          Flow – No Flow
                                                                                                                                                                                          Mounting Bracket
                                                                                                                                                                                          Easy Install
                                                                                                                                                                                          High Accuracy

                                                                                                                                                                                      £0.00Price
                                                                                                                                                                                      LP 100 Tank Level Junction BoxLP 100 Tank Level Junction Box
                                                                                                                                                                                          Submersible Level Sensors

                                                                                                                                                                                          CONTACT US FOR PRICE AND AVAILABILITY
                                                                                                                                                                                          Features:

                                                                                                                                                                                              All Plastic NEMA 4X Enclosure
                                                                                                                                                                                              2″ NPT Threaded Polyethylene Connection
                                                                                                                                                                                              Light Weight
                                                                                                                                                                                              Gortex® Breather: Lets Air In, Not Moisture
                                                                                                                                                                                              Vaporbloc® Technology
                                                                                                                                                                                              Cable Grip + Cord Grip Included
                                                                                                                                                                                              Perfect Mate for Levelpro Submersible Sensors

                                                                                                                                                                                          Applications

                                                                                                                                                                                              Chemical Tank Level Monitoring
                                                                                                                                                                                              Liquid Chemical Storage
                                                                                                                                                                                              Chemical Sumps
                                                                                                                                                                                              Submersible Level Sensors

                                                                                                                                                                                          £0.00Price
                                                                                                                                                                                          OBS-LE Digital Pressure Transmitter
                                                                                                                                                                                              Pressure Sensors & Transmitters

                                                                                                                                                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                                              Features:

                                                                                                                                                                                                  All Plastic | Gauge & Isolator
                                                                                                                                                                                                  Pressure Gauge + Switch + Transmitter + Isolator
                                                                                                                                                                                                  Green LED changes to Red – Relays Active
                                                                                                                                                                                                  Reduces Pressure Pulsations
                                                                                                                                                                                                  High Accuracy | ±1.0%
                                                                                                                                                                                                  Visual Notification of Relay Outputs
                                                                                                                                                                                                  One-Piece Molded Design | No Filling

                                                                                                                                                                                              £0.00Price
                                                                                                                                                                                              OBS-TT Pressure Gauge
                                                                                                                                                                                                  Pressure Sensors & Transmitters

                                                                                                                                                                                                  CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                                                  The OBS-TT Series Plastic ‘Tell-Tale’ Pressure Gauge is the industry’s most accurate pressure gauge on the market featuring a red ‘Tell-Tale’ pointer. With a Thermoplastic Polypropylene enclosure, OBS-TT Series gauges were engineered to last in the most corrosive environments.

                                                                                                                                                                                                  A ¼” NPT 316SS connection comes standard on all OBS-TT Pressure Gauges. This connection allows for them to be a perfect mate with our GI Series Gauge Guards when dealing with extremely corrosive chemicals. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator.

                                                                                                                                                                                                  OBS-TT Pressure Gauges come factory pre-filled, which is one of the main reasons we were able to achieve that industry leading accuracy of 0.75%. Each OBS-GTTssure alert for bag or filter change-outs.

                                                                                                                                                                                                  £0.00Price
                                                                                                                                                                                                  OBS-B Center Mount Pressure Gauge
                                                                                                                                                                                                      Gauges combined with Gauge Guard

                                                                                                                                                                                                      The OBS-B Series is the industry’s only integral molded one-piece plastic pressure gauge and gauge guard. Gauge guards are utilized to protect the pressure gauge from any corrosive media in the process system via an isolator. The OBS Series Pressure Gauges are truly unique and industry leading when it comes to pressure measurement in corrosive environments.

                                                                                                                                                                                                      OBS Pressure Gauges are a one-piece design and come factory pre-filled, resulting in an industry leading accuracy of 1.5%. Eliminating the need for filling saves the user time and the difficulty of having to fill a gauge isolator. The 3 movable red, yellow and green range tabs are designed to act as a visual pressure alert for bag or filter change-outs.

                                                                                                                                                                                                      The OBS Series is available in PVC, PP & PVDF, all equipped with a Teflon® Diaphragm, making the entire unit completely corrosion resistant and the perfect pressure gauge for chemical applications. Engineering the entire body in a plastic housing rather than just the gauge guard allows users to be confident that the complete unit will stand up in even the most corrosive environments.


                                                                                                                                                                                                      £0.00Price
                                                                                                                                                                                                      UF 500 Clamp-on Ultrasonic Flow MeterUF 500 Clamp-on Ultrasonic Flow Meter
                                                                                                                                                                                                          Ultrasonic Flow Meters

                                                                                                                                                                                                          CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                                                          The Truflo UF500 Series clamp-on ultrasonic flow meters are easy to install with exceptional long life performance. They are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance.

                                                                                                                                                                                                          The UF500 has a wide dynamic flow range of 0.1 to 5 m/s (0.3 to 15 ft/s). The sensor sends over 50 pulses/sec in order to provide accurate measurement of liquid flow rates in full pipes and can be used in low pressure systems.

                                                                                                                                                                                                          They are available in PVC or Aluminum providing the combination of being lightweight having excellent external corrosion resistance. The UF500 Ultrasonic flow meter can be installed in under two (2) minutes and requires no alteration to current piping.

                                                                                                                                                                                                          £0.00Price
                                                                                                                                                                                                          TIR Insertion Paddle Wheel Flow Meter
                                                                                                                                                                                                              Insertion Paddle Wheel Flow Meters

                                                                                                                                                                                                              CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                                                              The TIR Series paddle wheel flow meter has been designed for tough industrial applications. The TIR series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for both corrosive and non-corrosive liquids. The plastic insertion flow meter is a blind unit that provides a 4-20mA output and is internally equipped with a mini LED screen that allows the user to easily set their 4 and 20mA set points through the use of push-buttons. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                                                                                                                                                                              Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TIR liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                                                                                                                                                                              The TIR insertion paddle wheel flow meter is available in PVC, PP and PVDF. The flow sensors can be installed into pipe sizes ½ – 24” using our line of comprehensive custom fittings. Icon’s complete line of insertion paddle wheel flow meters will also retrofit into any Signet® style fitting.

                                                                                                                                                                                                              £0.00Price
                                                                                                                                                                                                              TK3B In-Line Paddle Wheel Flow MeterTK3B In-Line Paddle Wheel Flow Meter
                                                                                                                                                                                                                  In-line Paddle Wheel Flow Meters

                                                                                                                                                                                                                  CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                                                                  The TK3B Series stainless steel battery-operated paddle wheel flow meter has been designed for tough industrial applications. The TK3B series paddle wheel flow meter has been engineered to provide long-term accurate flow measurement for liquids. The 316SS in-line flow meter is equipped with a 360° rotatable vivid backlit LCD display showing both Flow Rate & Flow Total. The re-engineered low-drag, fluid-dynamic design of the paddle wheel allows it to stand alone as the industry’s most accurate flow meter.

                                                                                                                                                                                                                  Icon’s paddle wheel flow sensors incorporate a Tefzel® paddle coupled with a zirconium ceramic rotor pin and bushings. The TK3B series battery operated liquid flow meter, is industry’s longest lasting paddle wheel flow meter and comes with a lifetime warranty on the paddle wheel assembly.

                                                                                                                                                                                                                  The TK3B Series stainless steel flow meter has a 316SS body and is available with NPT, flanged or sanitary end connections. The TKB plastic in-line paddle wheel flow meters incorporate a true-union design with body materials available in PVC, PP and PVDF.


                                                                                                                                                                                                                  £0.00Price
                                                                                                                                                                                                                  NC-30 Level Flow SwitchNC-30 Level Flow Switch
                                                                                                                                                                                                                      Liquid Level Switches

                                                                                                                                                                                                                      CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                                                                      The NC30 Non-Contact liquid Level | Flow Sensor has been designed using high frequency technology to sense the presence of liquid | conductive | non conductive. Suitable for Non-Metallic Tubing | Tanks | Drums | Pipes.

                                                                                                                                                                                                                      Features:

                                                                                                                                                                                                                          All Plastic PP Design
                                                                                                                                                                                                                          Non-Intrusive Liquid Level / Flow Detection through Plastic or Fiberglass Walls
                                                                                                                                                                                                                          Easy Install
                                                                                                                                                                                                                          LED Display
                                                                                                                                                                                                                          M12 Disconnect or Fixed Cable Connector
                                                                                                                                                                                                                          Measure up to 2″ Pipe Diameter – PVC,CPVC Sch 40, 80, SDR 11
                                                                                                                                                                                                                          Senses up to 0.3″ (8mm) Wall Thickness

                                                                                                                                                                                                                      £0.00Price
                                                                                                                                                                                                                      OBS-C-LE SeriesOBS-C-LE Series
                                                                                                                                                                                                                          Pressure Sensors & Transmitters

                                                                                                                                                                                                                          CONTACT US FOR PRICE AND AVAILABILITY

                                                                                                                                                                                                                          Features:

                                                                                                                                                                                                                              4 in 1 – Pressure Gauge + Relay Switch + Transmitter + Isolator
                                                                                                                                                                                                                              2 Relay + 4-20mA Output
                                                                                                                                                                                                                              Alert for Bag/Filter Change-Out
                                                                                                                                                                                                                              Reduces Pressure Pump Pulsations
                                                                                                                                                                                                                              Highest Accuracy in Industry – 1.0%
                                                                                                                                                                                                                              One-Piece Molded Design (No Filling)

                                                                                                                                                                                                                          £0.00Price